Multi-Sensor/Instructions/MultiFlex Mount Guide
Revision as of 23:25, 8 February 2021 by Marques.Phillips (talk | contribs) (→Step by Step Instructions)
Description
This guide will show how to mount a Dahua multi- flex camera
Applicable models:
Step by Step Instructions
1. Drill holes and place the Anchors. 2. Use the mounting Screws to mount the Mounting plate to the Ceiling. 3. Safety Chain the camera to the Mounting Plate.
On the mount that comes with the camera, locate the three secure holes.
On the camera’s reversed side, you will find the same three secure holes.
Line up the two mount screws on the camera to the holes of the mount. Then lock into place.
Secure the three Torx screws
NOTE: This will ensure the camera WILL NOT come out of the mount lock.
Using the Torx wrench provided, screw the top into place.
