Thermal/DH-TPC-HT2201

DH-TPC-HT2201

DH-TPC-HT2201

Specifications	Quick Start Guide	Manual	Software
Template:DH-TPC-HT2201 Specification Template

Features

• 256 x 192 Uncooled VOx Thermal Sensor Technology
• 3.5 mm Fixed Athermalized Lens, Focus-free
• ±0.5° C (±0.9° F) Temperature Accuracy
• ≤ 50 mK Thermal Sensitivity
• Contactless Temperature Measurement
• Connect Handheld Device to a Computer and Monitor via USB
• Rechargeable Lithium-Ion Battery
• IP54 Ingress Protection
• Three-year Warranty*

Interface

Front Panel

No.	Component	Description
1.	Display Screen	Display screen Displays live interface and menu interface.
2.	Power button	Press and hold the power button to power on or off the Camera. On the live interface, press the power button, and the Camera goes to the standby state; under standby state, press any button to wake up the Camera. On the menu interface, press the power button to go to the submenu interface.
3.	Up/Down buttons	On the live interface, press the up button to go to the menu interface. On the menu interface, press the up or down buttons to select parameters.
4.	Back button	Exit or return to the previous menu.

Side Panel

No.	Component	Description
1.	Wrist rope hole	Used for threading wrist rope.
2.	Tripod port	Used for installing a tripod.
3.	Silicon plug
4.	Charging indicator light	Charging: Red light on. Full charging: Green light on. The battery can be recharged repeatedly, but it is a wearable product. If the standby time of the Camera has been greatly reduced, please contact the after-sales support to replace the battery.
5.	USB port	Used for connecting the USB cable.
6.	SD card slot	Used for installing a SD card.
7.	Thermal lens	Used for monitoring.
8.	Trigger button	On the live interface, press the button twice to capture images. On the live interface, press the button 3 times to start recording, and then press 3 times to stop recording. On the menu interface, press the button to return to the live interface. Under standby state, press the button to wake up the Camera.