USA/IPCamera/PTZ/Pro/52C430UNI

52C430UNI

52C430UNI
Specifications Manual Firmware PTZ Firmware

Build Date: 10-11-2021

Build Date: 03-03-2020
SD52C230T HN.jpg


FOV

Hardware Reset Instructions

In order to access the hardware reset button on the camera you must remove the outer casing and shell.

Remove the three (3) screws in the outer casing

Ptz reset 52c430uni - 1.jpg

Remove the four (4) screws in the dome covering

Ptz reset 52c430uni - 2.jpg

Remove the shell covering the camera

Ptz reset 52c430uni - 4.jpg

The hardware reset button is circled

Ptz reset 52c430uni - 5.jpg


Press and hold the reset button down for 30 seconds with the camera powered on.

After releasing the button the camera should be reset.