-
6. Click inside the fields to edit the parameters, such as Preset point
10. The Tour will begin and display the current status/preset position
2 KB (293 words) - 19:58, 10 January 2020
-
3. Click Preset
7. Click inside the field under the Preset column to edit
2 KB (285 words) - 19:57, 10 January 2020
-
Click OK to select a step of the Tour, then change the Preset , Dwell , and Speed settings as desired for each step
* Enter the Preset #
2 KB (435 words) - 00:12, 14 January 2021
-
2. The preset will be displayed under the Flag icon
6. Use the dropdown box that appears to select the Preset Point
1 KB (266 words) - 19:58, 10 January 2020
-
Click inside the Preset field
Use the interface to select the Preset #
1 KB (211 words) - 19:57, 10 January 2020
-
5.Expand the dropdown menu and select Preset
6.Select add to set the current position to preset one
607 bytes (89 words) - 19:55, 10 January 2020
-
5.Move the camera to the desired preset position
6.Click Setting to set the preset to the currently defined preset number
680 bytes (100 words) - 19:54, 10 January 2020
-
4. Set Desired Preset Location
6. Select the desired preset number and select save
775 bytes (98 words) - 19:56, 10 January 2020
-
4. Use the Directional arrows to locate the desired preset location
5. Enter Desired Preset number and select add
659 bytes (95 words) - 19:55, 10 January 2020
-
3. Expand the PTZ menu to view preset settings
4. Move your PTZ to the desired preset location using the Arrow Wheel
816 bytes (121 words) - 19:56, 10 January 2020
-
4. Move PTZ to the desired preset location
5. Enter Desired preset number and select setup
626 bytes (80 words) - 19:55, 10 January 2020
-
6. You can call basic PTZ action Preset, Tour, or Pattern when alarm is triggered.
2 KB (251 words) - 20:02, 4 February 2020
-
Creating a preset cannot be completed in the mobile application.
5. Select the Preset Menu from the bottom Indicated by a flag icon
979 bytes (136 words) - 19:56, 10 January 2020
-
!|PTZ Preset Trigger from Fixed Camera
|Use a fixed camera to trigger a NVR to move a PTZ to a preset based on an event
12 KB (1,998 words) - 20:28, 6 July 2023
-
=Preset Trigger from Fixed Camera=
...camera, a PTZ on the same recorder can be configured to respond with a PTZ Preset command
2 KB (303 words) - 22:44, 1 April 2021
-
* Dahua Network PTZ (with at least 1 preset)
...xt to the corresponding channel that the PTZ camera is added to and select Preset
1 KB (244 words) - 20:57, 24 January 2020
-
* Dahua Network PTZ (with at least 1 preset)
...xt to the corresponding channel that the PTZ camera is added to and select Preset
1 KB (239 words) - 21:47, 24 January 2020
-
* Dahua Network PTZ (with at least 1 preset)
...n the channel with the PTZ select the preset function and then type in the preset and then select OK.
995 bytes (141 words) - 16:49, 24 January 2020
-
* Dahua Network PTZ (with at least 1 preset)
...xt to the corresponding channel that the PTZ camera is added to and select Preset
1 KB (240 words) - 22:01, 24 January 2020
-
* Dahua Network PTZ (with at least 1 preset)
...xt to the corresponding channel that the PTZ camera is added to and select Preset point
2 KB (251 words) - 22:34, 24 January 2020
