IPCStorageRecordControl

Revision as of 22:56, 11 August 2016 by Qi (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Record Control

IPCRecordControl.jpg

Parameter

Function

Pack Duration

Here you can select file size within 1min~120min. Default setup is 8 minutes.

Pre-record

Please input pre-record value here.

For example, system can record the four seconds video in the buffer. The record begins from the fifth second.

Note:Configure pre-record time, when alarm or motion detection occurs, if there is no record, system will record the preceding n seconds record. 

Disk Full

There are two options: stop recording or overwrite the previous files when HDD is full.

  • Stop: Current working HDD is overwriting or current HDD is full, it will stop record.
  • Overwrite: Current working HDD is full; it will overwrite the previous file.

Record mode

There are three modes: Auto/manual/close.  

Record stream

There are two options: main stream and sub stream.


Retrieved from "https://DahuaWiki.com/index.php?title=IPCStorageRecordControl&oldid=15152"