NVR/Recording Setup/Motion Record Troubleshoot

Revision as of 18:41, 4 November 2015 by JP (talk | contribs) (Created page with "==Motion Recording Troubleshoot== Some settings will cause motion detection not detected When you have some issue with motion detection, please check these settings. #check i...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Motion Recording Troubleshoot

Some settings will cause motion detection not detected

When you have some issue with motion detection, please check these settings.

  1. check if you have enabled the motion recording:

NVRiSettingStorageScheduleRecord.png

  1. check if you have enable the motion detection and record channel:

NVRiSettingEventVideoDetectMotionDetect.png

  1. please check if detection time is right:

File:DetectionTime

  1. please check if the sensitivity and threshold are set correctly:

SensitivityandThreshold.jpg