| NVR FAQ
|
| Problem
|
Solution
|
| NVR will not boot.
|
Input power is not correct.
|
| Power connection is not correct.
|
| Power switch button is damaged.
|
| Program upgrade is wrong.
|
| HDD malfunction or something wrong with HDD ribbon.
|
| Seagate DB35.1, DB35.2，SV35 or Maxtor 17-g has compatibility problem. Please upgrade to the latest version to solve this problem.
|
| Front panel error.
|
| Main board is damaged.
|
| NVR often automatically shuts down or stops running.
|
Input voltage is not stable or it is too low.
|
| HDD malfunction or something wrong wit the ribbon.
|
| Button power is not enough.
|
| Front video signal is not stable.
|
| Working environment is too harsh, too much dust.
|
| Hardware malfunction.
|
| System is unable to detect hard drive.
|
HDD is broken.
|
| HDD ribbon is damaged.
|
| HDD cable connection is loose.
|
| Main board SATA port is broken.
|
| Video loss from 1, multiple, or all channels.
|
| Program is not compatible. Please upgrade to the latest version.
|
| Brightness is 0. Please restore factory default setup.
|
| Check your screen saver.
|
| NVR hardware malfunctions.
|
| I can not search local records.
|
| HDD ribbon is damaged.
|
| HDD is broken.
|
| Upgraded program is not compatible.
|
| The recorded file has been overwritten.
|
| Record function has been disabled
|
| Video is distorted when searching local records.
|
| Video quality setup is too low.
|
| Program read error, bit data is too small. There is mosaic in the full screen. Please restart the NVR to solve this problem.
|
| HDD data ribbon error.
|
| HDD malfunction.
|
| NVR hardware malfunctions.
|
| Time display is not correct.
|
| Setup is not correct
|
| Battery contact is not correct or voltage is too low.
|
| Crystal is broken.
|
