New GUI/Instructions/Remote Access via P2P

Revision as of 23:47, 22 May 2018 by William.V (talk | contribs) (Created page with "=New GUI - P2P Setup= ==Description== This article will go over initializing P2P on our New GUI devices ==Prerequisites== *Recorder with New GUI *Internet Access to the reco...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

New GUI - P2P Setup

Description

This article will go over initializing P2P on our New GUI devices

Prerequisites

  • Recorder with New GUI
  • Internet Access to the recorder

Step by Step Instructions

1. Under "Management" go to Network>TCP/IP

NewGUIP2PSetup-1.jpg

2. You can either set the device on a static ip or turn DHCP on to automatically grab an IP from the network. Save any changes

NewGUIP2PSetup-2.jpg

3. Locate P2P tab on the lower left and enable P2P

NewGUIP2PSetup-3.jpg

4. After saving it you should see the the status change to "Online", You can now use this device for remote viewing on our software

NewGUIP2PSetup-4.jpg

Software and Intructions

Apps SmartPSS 2.02
Instructions Mobile P2P Setup SmartPSS(BlackUI) P2P Setup