New GUI/Instructions/Remote Access via P2P

Revision as of 18:20, 23 May 2018 by William.V (talk | contribs)

New GUI - P2P Setup

Description

This article will go over initializing P2P on our New GUI devices

Prerequisites

  • Recorder with New GUI
  • Internet Access to the recorder

Step by Step Instructions

1. Under "Management" go to Network>TCP/IP

NewGUIP2PSetup-1.jpg

2. You can either set the device on a static ip or turn DHCP on to automatically grab an IP from the network. Save any changes

NewGUIP2PSetup-2.jpg

3. Locate P2P tab on the lower left and enable P2P

NewGUIP2PSetup-3.jpg

4. After saving it you should see the the status change to "Online", You can now use this device for remote viewing on our software

NewGUIP2PSetup-4.jpg

  • If you run into any issues getting the P2P to show online, reboot the device and try again. If that still doesn't work you may have a firewall that is blocking the connection to our servers

Software and Instructions

Check the links below to see how to add the device to our software

Apps
Error creating thumbnail: Unable to save thumbnail to destination
Instructions Mobile P2P Setup SmartPSS(BlackUI) P2P Setup
Retrieved from "https://DahuaWiki.com/index.php?title=New_GUI/Instructions/Remote_Access_via_P2P&oldid=32410"