Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Access Control/How To Wire a Mag Strike
Description
This article will show you how to wire a magnetic door lock to Dahua Recorder. With this setup, you can use trigger the alarm output via Motion Event, IVS, or alarm input.
Prerequisites
For this example, we will show you using:
1. Dahua NVR X72A2A.
2. Magnetic Door Lock.
3. Power Adapter 12v DC 2 amps.
Video Instruction
Step by Step Instruction
