Software/Dahua Toolbox/VDPConfig/Modify IP
Revision as of 22:27, 10 June 2019 by Marques.Phillips (talk | contribs)
Contents
How To Modify IP In VDPConfig
Description
This guide will show you how to modify the IP and network information of a device over a local network using VDPConfig for configuration and management.
Prerequisites
- Windows PC.
- Dahua video intercom device on the same LAN as the PC
- Dahua Toolbox
- VDP Config
Step by Step Instructions
1. Open DahuaToolbox and click Open next to VDPConfig
2. Discover the device in VDPConfig How To Discover A Device Using VDPConfig
3. Check the box next to the device in the list
To open network settings:
Click the Pencil icon under the Operate
OR
Click Modify IP towards the bottom of the window
4. The Modify IP Address window will appear