Record/Basic/Alarm Out

Alarm Out

Description

This feature will allow you to specify a range of time for a Dahua device to record when a physical alarm is triggered.

Instructions

[Expand]

SystemUI Old

Prerequisites

Video Instructions

Step by Step Instructions

Brief Description: We will be setting up an Alarm Buzzer/Strobe light to the alarm output of our Recorder. It will be triggered by a Camera's Motion Detection Event.

1.Go to Main Menu

2. Click on Events

3. On "Alarm Output" we select the relay our Buzzer is connected to. In this case Relay 1. Click on Apply and then Ok to save.

4. Next select "Video Detection" on the left and check the Enable box.
- Check Alarm Out and select the relay the buzzer is connected to
- Check Record Channel and the channel you want to record to when the event it tripped
- Check Snapshot if you'd like to store snapshots

Click on Apply and Ok to save

5. Got back to the main menu and select Storage

6. Select Schedule on the left menu and click on the "settings" icon. On the pop up menu check "Alarm" and "All" for all days of the week. Hit OK to go back

7. Click on Apply and Ok to save

[Expand]

SystemUI New

Prerequisites

Video Instructions

Step by Step Instructions

1. Go to the Main Menu

2. Go to Alarm

3. Select Alarm Output on the left menu and place the relay the buzzer is connected to on "auto". Click on apply to save

4. Select Video Detection on the left menu and Enable the event. Click on the setting tab next to Alarm out

5. Make sure it is on and select the Relay the buzzer is wired to. Click OK

6. Check the Alarm Upload box and hit apply to save the configuration

7. Go back to the Main menu and go to Storage

8. Select Schedule on the left menu and click on the "Settings" icon

9. Select Alarm and "All" for all days of the week. Select OK

10. Click on Apply to finalize the settings

[Expand]

WebUI Old

Prerequisites

Video Instructions

Step by Step Instructions

1. Login to the camera's WEBUI

2. Go to Setup>Event>Alarm Output and select the relay the buzzer is wired too. Hit OK to save.

3. Go to Video Detection on the left menu. Enable Motion Detection, Alarm Out (With the corresponding relay), and hit okay to save

[Expand]

WebUI New

Prerequisites

Video Instructions

Step by Step Instructions

1. Login to the WEBUI

2. Go to Alarm

3. Select Alarm Output on the left menu and enable the relay the buzzer is wired to

4. Select Video detection on the left menu. Enable Motion Detection and go to Alarm Out settings.

5. Check the General Alarm box and select the relay to enable. Click on OK

6. Click on OK to save and finalize the settings

[Expand]

SmartPSS

Prerequisites

Video Instructions

Step by Step Instructions

1. Select the Recorder on the left menu and go to "Alarm I/O" under Event

2. Make sure that Alarm Output is Enabled and select the relay the buzzer is wired to. Click on Save

3. Under Event, go to Video Detection

4. Make sure Motion Detection is enabled and Alarm out enabled as well. Select the relay the buzzer is wired to.

[Expand]

DSS Express S

Template:Alarm Out DSS Express

[Expand]

DSS4004-S2 & DSS7016-S2

Template:Alarm Out DSS S2

[Expand]

Mobile:iDMSS Plus & gDMSS Plus

Template:Alarm Out MobileUI DMSS