PFM900 To HDCVI Or Analog Camera Video Test

Revision as of 21:27, 1 March 2016 by Nathan (talk | contribs) (Created page with "==PFM900 to IP HDCVI or Analog Camera Video Test== ===PFM900 to IP HDCVI or Analog Camera Video Test Instructions=== ====Pre-Requisites==== * PFM900 * HDCVI or Analog Camera...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

PFM900 to IP HDCVI or Analog Camera Video Test

PFM900 to IP HDCVI or Analog Camera Video Test Instructions

Pre-Requisites

  • PFM900
  • HDCVI or Analog Camera (or video output)
  • HDCVI or Analog Cable
  • Power adapter for Cameras over 12 volts / 2amps input


500x500px


1. Power on your PFM900 Device, if it does not power on check How to Charge the PFM900


20160225 1042161234.jpg


2. Connect the camera's power with the "DC 12v OUTPUT" on the PFM900 or use a Power adapter for Cameras over 12 volts / 2amps input


500x500px


3. Use a HDCVI or Analog cable to connect the camera's HDCVI or Analog port to the PFM900's "VIDEO IN" port


500x500px


4. Now select "ONVIF Test" and press the right arrow button


500x500px


5. You should now see a live video feed from the camera or output video device you are connected to. Press the "SET" button to configure PTZ control, Press the "SCR" button to go full screen


500x500px

Retrieved from "https://DahuaWiki.com/index.php?title=PFM900_To_HDCVI_Or_Analog_Camera_Video_Test&oldid=6303"