Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Thermal/Temperature Monitoring/3rd Party VMS/Milestone Configure DHI ASI7213X T1
Contents
Configure DHI-ASI7213X-T1 with Milestone
Description
These instructions will show you how to setup Milestone XProtect Corporate 2020 R1 to work with DHI-ASI7213X-T1
Prerequisites
- Completed Add DHI-ASI7213X-T1 To Milestone
Video Instructions
Step by Step Instructions
1. Select Recording Servers, select the server the camera is added to
Expand the device tree and select the DHI-ASI7213X-T1
Then click the Events tab
2. Click Add
3. Select Temperature Detection Started
Click OK
4. Click Add
5. Select Temperature Detection Stopped
Click OK
6. Select the Camera 2 stream of the device
Click Yes to save
7. With the Camera 2 of the device select
Click Add
Select Temperature Detection Started
Click OK
Click Add
Select Temperature Detection Stopped
Click OK
Click outside the fields to receive the save prompt, click Yes to save
Alarm Configuration
