Face Detection

	Face detection is to detect if there is any human face appearing in the video

	Face Detection
Set Up	Configure Alarm Trigger	Notifications
Set Up Face Detection on your device using various interfaces. > How To Set Up Face Detection Alarm	Configure responses when the Face Detection alarm is triggered, such as email notifications or alarm output. > Configure Alarm Response	Receive notifications using the mobile app > Set Up Notifications

Instructions

[Expand]

SystemUI Old

Description

This guide will show how to enable Face Detection in the New SystemUI on a Dahua device

Prerequisites

• Dahua device with Face Detection feature and New SystemUI

Video Instructions

==Step By Step Instructions==

[Expand]

SystemUI New

Description

This guide will show how to enable Face Detection in the New SystemUI on a Dahua device

Prerequisites

• Dahua device with Face Detection feature and New SystemUI

Video Instructions

Step By Step Instructions

1. From the Main Menu

Select AI

2. A Smart Plan must be created for the channel

Select Parameters > Smart Plan

3. Use the drop-down box to select the channel

4. Click to select/enable Face Detect

5. Click Apply to save

6. Now the Face Detection feature must be enabled

Select Parameters > Face Detection

7. Use the drop-down box to select the channel

Toggle the switch to Enable

The Face Detection feature is now enabled

8. Use the additional parameters to adjust other settings for the Face Detection feature:

9. The Live View can now show live Face Detection

[Expand]

WebUI Old

Description

Face detection is to detect if there is any human face appearing in the video, and capture the face then send it to the NVR for analysis and processing, it can activate snapshot, record and alarm.

Prerequisites

• Intelligent Network Camera.
• A HDCVI Camera that is connected to a HDCVI DVR that has intelligent features.
• Updated firmware that supports intelligent features.
• Internet Explorer.

Video Instructions

Step By Step Instructions

1.Log into device using the Web Service.

2.Select Setup -> Select Event -> Select Face Detection

3. Click “Enable”.

4. Click face enhancement to enhance the face image display.

5. Select max and min size, draw max and min target for target filtering. This step is to filter target, which can’t be operated under default status.

6. Activate record, alarm, email and snapshot according to the requirements.

7. Target filter can set max target and min target, which means it can detect max and min target.

8. Click ok to complete settings.

[Expand]

WebUI New

Description

Provide steps necessary to configure Face detection on the new web UI

Prerequisites

• Windows Computer
• Dahua NVR on new UI
• Dahua Camera Capable of Face Detection

Video Instructions

Step By Step Instructions

1) From the home page of your Recorder Select AI

2) Select Parameters, Then Select Smart Plan.

3) Select the proper channel from the drop down and ensure Face Detection is selected and ok. Then select Face Detection on the left.

4) Enable face detection and ensure that the target area is correctly Set to where you wish to detect faces and select ok.

[Expand]

DSS Express

Template:IVS Face Detection DSS Express

[Expand]

DSS4004-S2 & DSS7016-S2

Template:IVS Face Detection DSS S2