LincX2PRO/Add Device and Setup Push Notifications
Contents
Add Device and Setup Push Notifications
Description
This guide will show how to add a LincX2Pro device as a cloud device to the DMSS app and also setup push notifications for the device
Prerequisites
- DMSS installed
- Dahua Online Account - How To Create A Dahua Online Account
- QR Code / Serial Number of Dahua LincX2Pro device
Step by Step Instructions
1. Open DMSS App then go to Me menu. If you are not logged into an account, it is required to do so before proceeding to adding the device.
2.Tap on Device, and tap on + button on the top right hand corner, then choose SN/Scan.
3. Scan the QR code of the device that is located on the back or side.
4. It will show the Serial Number under "Device SN and Security Code".
Tap on Next.
5. Make sure your device is connected to the power and the indicator light flashes blue. Tap on Next.
6. When a prompt comes up, Tap on Connect to continue.
7. Setup the device password. Then tap on Next.
8. Choose the WIFI network the LincX2Pro Device will be connecting to.
9. Enter Wifi password and tap on Next to continue the setup.
10. Wait while the device connects to the Wifi.
11. Enter the user-defined Device Name. Then tap on Save.
12. Adjust the Timezone and Daylight Savings Time. Then tap on Done.
13. Select the existing door chime you have at the location. Electronic Chime or Mechanical Chime, or if you are using a Wireless door chime, you should see this pop-up under Wireless Chime. Then tap on Completed on the bottom. If you don't have any sort of external chime, tap on Skip at the top instead.
14. Once setup is complete, you will be able to view the live view of your Doorbell Camera.
15. Go to Me > General. Make sure that the Notification Switch is enabled and now you should receive a call notification when doorbell button is pushed.
Mobile:iDMSS Plus & gDMSS Plus
Video Instructions
Step by Step Instructions
1. From the Home screen of the app
Press Me
2. Press Log in Now (if not already logged into an account)
3. Enter the username and password for the account
Press Log in
4. Press Device
5. Press the + sign at the top right of the screen to begin adding a device
6. Select SN/Scan
7. Use the camera interface to scan the QR code for the device or press Manually Enter SN to type in the Serial Number
8. With the Device SN entered, Press Next
9. In the Add Device screen
Enter a Device Name (name for the device in the app)
Enter the Username / Password for the device
10. Press the Save icon
11. Select the appropriate Time Zone settings for the device
Press Done
12. The app will attempt to connect to and load the device
Press the back arrow to return to the menu
13. The Device Manager screen will show a list of added device
Confirm it appears in the list under Device Manager
14. Press Message
15. Use the toggle at the top to press the Cloud icon, to select Cloud Devices
16. Press the notification icon (Bell) to subscribe to notifications for a device
17. The Alarm Subscription menu will show a list of devices added to the cloud account
The added device will appear in the list
Toggle the switch next to the device to enable notifications
18. A prompt will appear to confirm a successful subscription
19. Press the arrow to exit the menu
20. In the Home screen of the app, select Me
21. Press General
22. Toggle the switch next to Notifications to enable notifications for this cloud account
23. The period can be adjusted, by default it will enrolled for 24 hours a day
24. Press the arrow to exit the menu