Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Parking Lot Entrance Management
Contents
Description
DSS can manage multiple parking lot entrances and can work with multiple ANPR cameras setup at entry and exit points.
DSS can accurately determine how many vehicles are in a parking lot based on the number of entry and exit points.
You can also setup the number of parking spots for each parking lot.
Prerequisites
- Dahua ANPR Camera
- Dahua NVR
- DSS
- Computer for configuration
Instructions
Configure LPR Camera | |||||
---|---|---|---|---|---|
Set up and configure the LPR camera for plate detection > How To Setup and Configure LPR Camera |
↓
Add LPR Camera to DSS | |||||
---|---|---|---|---|---|
> Add LPR Camera via DSS Client | > Add LPR Camera via DSS Manager Portal |
↓
Add NVR to DSS | |||||
---|---|---|---|---|---|
> Add NVR via DSS Client | > Add NVR via DSS Manager Portal |
↓
Configure Alarm | |||||
---|---|---|---|---|---|
Set up and configure the correct Alarms (example) in DSS > How To Setup Alarm Events in DSS |
Alarm Type | Description |
---|---|
License Plate Snapshot | When ANPR device recognizes license plate, it will be reported to DSS Pro by NVR, alarm is triggered on DSS Pro, and extract video before and after license plate recognition happens from NVR, save it on the server installed on DSS Pro. Default record time is 20s, 10s before and 10s after alarm is triggered. |
Restricted List Alarm | Mark some plate number as blacklist vehicle, compare the plate number reported by ANPR device with the plate number of blacklist vehicle. It will trigger alarm if it is the plate number of blacklist vehicle. |
Parking Overtime |
- Select the alarm type as [Entrance Alarm] > [License Plate Snapshot] and [Restricted List Alarm] and [Parking Overtime].
- Choose the alarm source, select the camera you need to bind.
- Click 'Alarm Linkage
- Click + choose Link Cameras select the camera you want to link.
- Set the record time and prerecord time.
- Enable this two functions, when the alarm is triggered, it will open the camera video on client and capture a picture
Click , choose “Link User” Select the user you want to link.
Click , choose “Link Email” Select the email template and address. Choose “send event image”, when the alarm is triggered, it will send capture a picture in the email. Click “Alarm Attribute”.
Edit the alarm name. Choose the priority as High. Click OK.
- Select the alarm type as [Entrance Alarm] > [License Plate Snapshot] and [Restricted List Alarm] and [Parking Overtime].
- Choose the alarm source, select the camera you need to bind.
- Click Alarm Linkage