Display screen Displays live interface and menu interface.
2.
Power button
Press and hold the power button to power on or off the Camera.
On the live interface, press the power button, and the Camera goes to the standby state; under standby state, press any button to wake up the Camera.
On the menu interface, press the power button to go to the submenu interface.
3.
Up/Down buttons
On the live interface, press the up button to go to the menu interface.
On the menu interface, press the up or down buttons to select parameters.
4.
Back button
Exit or return to the previous menu.
Side Panel
No.
Component
Description
1.
Wrist rope hole
Used for threading wrist rope.
2.
Tripod port
Used for installing a tripod.
3.
Silicon plug
4.
Charging indicator light
Charging: Red light on.
Full charging: Green light on. The battery can be recharged repeatedly, but it is a wearable product. If the standby time of the Camera has been greatly reduced, please contact the after-sales support to replace the battery.
5.
USB port
Used for connecting the USB cable.
6.
SD card slot
Used for installing a SD card.
7.
Thermal lens
Used for monitoring.
8.
Trigger button
On the live interface, press the button twice to capture images.
On the live interface, press the button 3 times to start recording, and then press 3 times to stop recording.
On the menu interface, press the button to return to the live interface.
Under standby state, press the button to wake up the Camera.