NVR/Basic Setup/Smart Add

Revision as of 17:24, 23 March 2016 by JP (talk | contribs) (JP moved page NVRSmartAdd to NVR/Basic Setup/Smart Add)

Smart Add

Accessing Smart Add

  • Method 1: From the startup wizard, click Smart add button.
Error creating thumbnail: Unable to save thumbnail to destination
  • Method 2: On the preview interface, right click mouse and then select Smart add. Now you can go to the smart add interface.
Error creating thumbnail: Unable to save thumbnail to destination

Smart Add Setup

NVRSmartAdd3.png

Click smart add button, you can see device enables DHCP function.

NVRSmartAdd4.png

System pops up the following interface for you to confirm IP information if there are several IP segments

NVRSmartAdd5.png

Now you can see system is auto adding IPC to the corresponding channels.

NVRSmartAdd6.png

You can see the following dialog box after system successfully added network cameras.

Error creating thumbnail: Unable to save thumbnail to destination
Retrieved from "https://DahuaWiki.com/index.php?title=NVR/Basic_Setup/Smart_Add&oldid=9235"