NVR/Basic Setup/Initialize Dahua IP Camera via FLIR NVR POE

Initialize Dahua IP Camera via FLIR NVR POE

Description

  • How to Initialize a camera From the back of the NVR.
  • Note: If your IP Camera is connected to the LAN, these instructions will not apply. Please see, "How to Connect IP Camera to NVR"

Prerequisites

  • ConfigTool 3.20
    ConfigTool download
  • Windows PC.
  • Physical Connection to Camera Port on the back of The NVR.

Step by Step Instructions

1. Launch ToolBox and run ConfigTool

Dhcpp1.png

2. Click Initialize

Dhcpp2.png

3. Select Device and Click Initialize

Dhcpp3.png

4. Create Password and Enter Password Recovery Email.

Dhcpp4.png

5. Select options for Easy4IP and update settings

Dhcpp5.png

6. Your device should now be activated

Dhcpp6.png

7. Select Edit and change IP to DHCP

Dhcpp7.png Dhcpp8.png

8. Your device should update to a usable IP address for your NVR

Dhcpp9.png