Difference between revisions of "3rd Party VMS/Avigilon/Add Dahua Device"
| Line 1: | Line 1: | ||
=Add Dahua Device to Avigilon Control Center 7 via ONVIF= | =Add Dahua Device to Avigilon Control Center 7 via ONVIF= | ||
==Description== | ==Description== | ||
| + | This guide will show how to add a Dahua device to Avigilon Control Center 7 | ||
==Prerequisites== | ==Prerequisites== | ||
| + | * Avigilon Control Center 7 installed | ||
| + | * Avigilon server setup on network | ||
| + | * Dahua device setup on network | ||
==Video Instructions== | ==Video Instructions== | ||
<embedvideo service="youtube">https://youtu.be/zvRNK4UFNOA</embedvideo> | <embedvideo service="youtube">https://youtu.be/zvRNK4UFNOA</embedvideo> | ||
==Step by Step Instructions== | ==Step by Step Instructions== | ||
| − | 1. | + | 1. Open Avigilon Control Center 7 |
| − | |||
| + | Select the server | ||
| + | |||
| + | Log in using the username/password and click 'Log In' | ||
[[File:Add_Dahua_Device_-_Avigilon_-_1.jpg|600px]] | [[File:Add_Dahua_Device_-_Avigilon_-_1.jpg|600px]] | ||
| + | |||
| + | 2. Right click the server name in the Device Tree and select 'Setup' | ||
[[File:Add_Dahua_Device_-_Avigilon_-_2.jpg|600px]] | [[File:Add_Dahua_Device_-_Avigilon_-_2.jpg|600px]] | ||
| + | |||
| + | 3. Click Connect/Disconnect Devices | ||
[[File:Add_Dahua_Device_-_Avigilon_-_3.jpg|600px]] | [[File:Add_Dahua_Device_-_Avigilon_-_3.jpg|600px]] | ||
| + | |||
| + | 4. Discovered devices will appear int he window at the top of the screen. | ||
[[File:Add_Dahua_Device_-_Avigilon_-_4.jpg|600px]] | [[File:Add_Dahua_Device_-_Avigilon_-_4.jpg|600px]] | ||
| + | |||
| + | 5. Left click to select the device you wish to add in the list | ||
| + | |||
| + | Then click 'Connect' at the bottom of the screen | ||
[[File:Add_Dahua_Device_-_Avigilon_-_5.jpg|600px]] | [[File:Add_Dahua_Device_-_Avigilon_-_5.jpg|600px]] | ||
| + | |||
| + | 6. The software will attempt to connect to the device | ||
[[File:Add_Dahua_Device_-_Avigilon_-_6.jpg|600px]] | [[File:Add_Dahua_Device_-_Avigilon_-_6.jpg|600px]] | ||
| + | |||
| + | 7. After a few moments the Device Authentication window will appear | ||
[[File:Add_Dahua_Device_-_Avigilon_-_7.jpg|600px]] | [[File:Add_Dahua_Device_-_Avigilon_-_7.jpg|600px]] | ||
| + | |||
| + | 8. Enter the User Name and Password for the device, then click 'OK' | ||
[[File:Add_Dahua_Device_-_Avigilon_-_8.jpg|600px]] | [[File:Add_Dahua_Device_-_Avigilon_-_8.jpg|600px]] | ||
| + | |||
| + | 9. The software will attempt to log in to the device | ||
[[File:Add_Dahua_Device_-_Avigilon_-_9.jpg|600px]] | [[File:Add_Dahua_Device_-_Avigilon_-_9.jpg|600px]] | ||
| + | |||
| + | 10. Once successfully added, the device will appear in the lower portion of the screen under 'Connected Devices' | ||
[[File:Add_Dahua_Device_-_Avigilon_-_10.jpg|600px]] | [[File:Add_Dahua_Device_-_Avigilon_-_10.jpg|600px]] | ||
| + | |||
| + | 11. The device will appear in the Device Tree under Live View and can be accesses by double clicking or dragging and dropping into the center of the window | ||
[[File:Add_Dahua_Device_-_Avigilon_-_11.jpg|600px]] | [[File:Add_Dahua_Device_-_Avigilon_-_11.jpg|600px]] | ||
Revision as of 22:03, 4 November 2019
Contents
Add Dahua Device to Avigilon Control Center 7 via ONVIF
Description
This guide will show how to add a Dahua device to Avigilon Control Center 7
Prerequisites
- Avigilon Control Center 7 installed
- Avigilon server setup on network
- Dahua device setup on network
Video Instructions
Step by Step Instructions
1. Open Avigilon Control Center 7
Select the server
Log in using the username/password and click 'Log In'
2. Right click the server name in the Device Tree and select 'Setup'
3. Click Connect/Disconnect Devices
4. Discovered devices will appear int he window at the top of the screen.
5. Left click to select the device you wish to add in the list
Then click 'Connect' at the bottom of the screen
6. The software will attempt to connect to the device
7. After a few moments the Device Authentication window will appear
8. Enter the User Name and Password for the device, then click 'OK'
9. The software will attempt to log in to the device
10. Once successfully added, the device will appear in the lower portion of the screen under 'Connected Devices'
11. The device will appear in the Device Tree under Live View and can be accesses by double clicking or dragging and dropping into the center of the window
