Difference between revisions of "3rd Party VMS/Control4/Integration Features"
(Created page with "=Control4 Integration Features= ==Driver Features== *Allows NVR Icon on Watch Menu, and Connection paths for HDMI and VGA into a Control4 video system *Event Connection for Tr...") |
(→Driver Features) |
||
| Line 7: | Line 7: | ||
*Uses Control4’s cable Proxy | *Uses Control4’s cable Proxy | ||
*Connection paths for camera proxy interface | *Connection paths for camera proxy interface | ||
| + | ==Description of Items in Driver== | ||
| + | Driver Version | ||
| + | *Current Driver version install on project | ||
| + | *Driver Persistence | ||
| + | *Current saved state of driver data. (note: if this says, ‘Not Saved’ and director reboots, the data will not be available on Load of driver). | ||
| + | *Driver Information | ||
| + | *Driver Specific information | ||
| + | *Debug Mode (Default: Off) | ||
| + | *Used to view the driver log. Debug will turn off automatically after 15 minutes | ||
| + | *Device Connection | ||
| + | *Current Device State (Online or Offline, Failed to Check in) | ||
| + | *Polling Timer (Seconds) | ||
| + | *Amount of time between polling checks. If 0 then polling is disabled. | ||
| + | *NVR IP Address | ||
| + | *IP address of NVR | ||
| + | *NVR Username-Username used to log into NVR | ||
| + | *NVR Password-Password used to log into NVR | ||
| + | *# of Channels-The quantity of channels on NVR, example: 4, 8, 16, 256 | ||
| + | *NVR Model-Will display the Model number of the NVR attached to the driver | ||
| + | *Remote RED Button-Shortcut for RED Room Command (default: 4 Split Group 0) | ||
| + | *Remote GREEN Button-Shortcut for GREEN Room Command (default: 4 Split Group 1) | ||
| + | *Remote YELLOW Button-Shortcut for YELLOW Room Command (default: 8 Split) | ||
| + | *Remote BLUE Button-Shortcut for BLUE Room Command (default: 9 Split) | ||
| + | *Server Communication Port-The port used for Event Notification (default: unused port chosen during initial setup automatically) | ||
Revision as of 14:48, 22 April 2019
Control4 Integration Features
Driver Features
- Allows NVR Icon on Watch Menu, and Connection paths for HDMI and VGA into a Control4 video system
- Event Connection for Triggers FROM NVR (using either, connection binding or Composer Event)
- NUMBER buttons select that channel (example: Button 6 = Camera 6 on the TV)
- Setup RED, GREEN, YELLOW, and BLUE buttons to trigger different views on TV
- Uses Control4’s cable Proxy
- Connection paths for camera proxy interface
Description of Items in Driver
Driver Version
- Current Driver version install on project
- Driver Persistence
- Current saved state of driver data. (note: if this says, ‘Not Saved’ and director reboots, the data will not be available on Load of driver).
- Driver Information
- Driver Specific information
- Debug Mode (Default: Off)
- Used to view the driver log. Debug will turn off automatically after 15 minutes
- Device Connection
- Current Device State (Online or Offline, Failed to Check in)
- Polling Timer (Seconds)
- Amount of time between polling checks. If 0 then polling is disabled.
- NVR IP Address
- IP address of NVR
- NVR Username-Username used to log into NVR
- NVR Password-Password used to log into NVR
- of Channels-The quantity of channels on NVR, example: 4, 8, 16, 256
- NVR Model-Will display the Model number of the NVR attached to the driver
- Remote RED Button-Shortcut for RED Room Command (default: 4 Split Group 0)
- Remote GREEN Button-Shortcut for GREEN Room Command (default: 4 Split Group 1)
- Remote YELLOW Button-Shortcut for YELLOW Room Command (default: 8 Split)
- Remote BLUE Button-Shortcut for BLUE Room Command (default: 9 Split)
- Server Communication Port-The port used for Event Notification (default: unused port chosen during initial setup automatically)
