3rd Party VMS/Milestone/Setup IVS Rules

Revision as of 22:55, 9 February 2018 by William.V (talk | contribs)

How to Setup IVS Rules in Milestone

Compatible Devices

Description

This article shows how to set up an Intrusion rule in Milestone with a DH-IPC-HDW44A1MN-I.

Please make sure that the camera already has an Intrusion or Tripwire rule setup on the camera before continuing to Milestone.

NOTE: Intrusion and Tripwire are the only two rules working in Milestone as of current testing.

Prerequisites

  • Device with IVS Features
  • IVS rule already setup in the device
  • XProtect Management Client

Video Instructions

Step by Step Instructions

1. Open XProtect Management Client and go to Rules

IVSMilestone1.PNG

2. Right-click and add a rule

IVSMilestone2.PNG

3. Name the new rule and click on even to set an event type

IVSMilestone3.PNG

4.Devices>Configurable Events>Intrusion Started and then click on OK

IVSMilestone5.PNG

5.Next, we need to add the device

IVSMilestone6.PNG

6.Highlight the device>Add>OK> then click on Next to proceed

IVSMilestone7.PNG

7.Enable "Day of week is" and select the days of the week you want it to be active

IVSMilestone8.5.PNG

8.Enable "Make a new log" and give it a name, this will help you keep track of when the event was triggered

IVSMilestone9.PNG IVSMilestone9.5.PNG

9.Click on Finish to finalize your rule

IVSMilestone10.PNG

10.Now go to Devices and select your device, click on Event

IVSMilestone11.PNG

11.Add Intrusion started and Intrusion stopped

IVSMilestone12.PNG IVSMilestone13.PNG

12.Save the changes

IVSMilestone14.PNG

13.Go to "Rule Log" to check when the events have been triggered

IVSMilestone15.PNG