Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Access Control/How To Change IP

How to change access controller IP address


This article is to show you how to change IP address of the access controller device.


1. ACS Config Tool.

Click Here To Download ASC Config Tool.

2. Computer that connected to the same network as Access Controller

Step by Step Instruction

1. Launch ACS Configtool.

ASC1204 Time Sync 1.png

2. Click on Search Settings.

ASC1204 Time Sync 2.png

3. Enter the password of access controller. Click Ok.

ASC1204 Time Sync 3.png

4. Click on Edit (Pencil Icon).

ASC1204 Setup Edit.png

5. Set the IP address, Subnet Mask, and Default gateway. Click Ok.

ASC1204 Setup IP.png