Difference between revisions of "LincX2PRO/Setup Motion Detection"

Line 4: Line 4:
  
 
==Prerequisites==
 
==Prerequisites==
* [[LincX2PRO/L26N|L26N]] setup and added to the mobile app [[DMSS|DMSS]]
+
* LincX2PRO device setup and added to the mobile app [[DMSS|DMSS]]
  
 
==Step by Step Instructions==
 
==Step by Step Instructions==

Revision as of 22:52, 30 November 2020

Description

This article will how to setup and configure the Motion Detection settings of a LincX2PRO device using the DMSS mobile app

Prerequisites

  • LincX2PRO device setup and added to the mobile app DMSS

Step by Step Instructions

DMSS New Icon.png DMSS

1. Open the DMSS mobile app.


Select Device at the bottom.
Tap on the three dots "..." to the right of the LincX2Pro device

LincX2ProMotionDetection1.png

2. Select Device Details

LincX2ProMotionDetection2.png

3. Select Arming Settings

LincX2ProMotionDetection3.png

4. Tap on the slider next to Motion Detection to enable it

LincX2ProMotionDetection4.png

5. If you also want to detect Humans specifically, tap on the slider next to Human Detection to enable it

LincX2ProMotionDetection5.png

6. Tap on Motion Detection Area

LincX2ProMotionDetection6.png

7. Tap on Genereal Motion Zone

LincX2ProMotionDetection7.png

8. Adjust the areas that the camera will look for motion by keeping areas in red highlighted for motion detection or clear to not detect for motion.
Tap on the broom icon on the left to clear everything highlighted on the screen.
Tap on the center icon to swap between areas that are highlighted and not highlighted.
Tap on the eraser icon on the right to switch between adding or removing highlighted areas.
When you are done, tap on the floppy disk save icon at the top right.
Then tap on the back arrow at the top left

LincX2ProMotionDetection8.png

9. Tap on Human Motion Zone

LincX2ProMotionDetection9.png

10. Adjust the areas the camera will look for human motion by moving around and resizing the box(es) on the screen.
To remove all detection boxes, tap on the trash can icon.
To rotate a selected box, tap on the circular arrows icon.
To remove a selected box, tap on the box with a minus icon.
To add an additional box, tap on the box with a plus icon.
When you are done, tap on the floppy disk save icon at the top right.
Then tap on the back arrow at the top left

LincX2ProMotionDetection10.png

11. Tap on the back button at the top left

LincX2ProMotionDetection11.png

12. Tap on Detection Sensitivity

LincX2ProMotionDetection12.png

13. Tap on the number for the amount of sensitivity for Motion Detection.
Then tap on Save at the top

LincX2ProMotionDetection13.png

GDMSS icon.pngMobile:iDMSS Plus & gDMSS Plus

Video Instructions

1. Select your LincX2PRO unit under the "Device" tab

LincX2PRO MD Setup-1.png

2. Tap on Motion Detection Setting

LincX2PRO MD Setup-2.png

3. Assure that the switch is enabled and select the Detection Sensitivity to configure the sensitivity

LincX2PRO MD Setup-3.png

4. Save the desired settings and go back

LincX2PRO MD Setup-4.png

5. Go back

LincX2PRO MD Setup-5.png

6. Tap on Message

LincX2PRO MD Setup-6.png

7. Select the Cloud icon to view the devices linked to your DMSS account and tap on the bell icon

LincX2PRO MD Setup-7.png

8. Tap on your LincX2PRO device

LincX2PRO MD Setup-8.png

9. Ensure that the switch is enabled and click on the Floppy Disk icon to save, go back

LincX2PRO MD Setup-9.png

10. Go back again

LincX2PRO MD Setup-10.png

11. Go to "Me"

LincX2PRO MD Setup-11.png

12. Make sure that the Notification Switch is enabled and now you should receive Motion Detection notifications

LincX2PRO MD Setup-12.png