Template:DVR Change to HDCVI Analog and IP WebUI New

Revision as of 22:37, 21 October 2020 by Marques.Phillips (talk | contribs) (Step-by-Step Instructions for XVR)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Step-by-Step Instructions for XVR

1. Enter the IP of the device into a browser (default 192.168.1.108)

At the Web Login

Enter the Username and Password

Click Login

2. Click Management

DVR Change to HDCVI Analog and IP - WebUI New - 1.jpg

3. Click Camera

DVR Change to HDCVI Analog and IP - WebUI New - 2.jpg

4. Click Channel Type

DVR Change to HDCVI Analog and IP - WebUI New - 3.jpg

5. Check the box under the IP column next to the Channel to enable IP for

DVR Change to HDCVI Analog and IP - WebUI New - 4.jpg

6. Click Save

DVR Change to HDCVI Analog and IP - WebUI New - 5.jpg

Confirm the prompts that appear by clicking OK

DVR Change to HDCVI Analog and IP - WebUI New - 6.jpg

DVR Change to HDCVI Analog and IP - WebUI New - 7.jpg

The system will reboot

When the unit is back up the IP channels will be enabled

DVR Change to HDCVI Analog and IP - WebUI New - 9.jpg