Difference between revisions of "Thermal/DHI-ASI7213X-T1/Instructions/Initial Setup Physical"

From Dahua Wiki

Jump to: navigation, search
(Created page with "=DHI-ASI7213X-T1 Physical Installation= ==Description== This guide will cover the physical installation of the thermal monitoring station. ==Prerequisites== *[https://dahua...")
 
 
(One intermediate revision by the same user not shown)
Line 6: Line 6:
 
==Prerequisites==
 
==Prerequisites==
 
*[https://dahuawiki.com/Thermal/DHI-ASI7213X-T1 DHI-ASI7213X-T1]
 
*[https://dahuawiki.com/Thermal/DHI-ASI7213X-T1 DHI-ASI7213X-T1]
 +
*ASF072X-T1
  
==Video Instruction==
+
==Step by Step Instruction==
 +
 
 +
1. Remove the 2 screws on the rear cover, and then open it.
 +
 
 +
[[file:ASF072X-T1_Base_Rear_Cover.jpg|300px]]
 +
 
 +
2. You will see 4 screws attached to the mounting plate. Remove all 4 screws.
 +
 
 +
[[file:DHI-ASI7213X-T1_Mounting_Plate.jpg|500px]]
 +
 
 +
3. Attach the mounting plate to DHI-ASI7213X-T1 unit.
 +
 
 +
[[File:DHI-ASI7213X-T1_Mounting_Plate_Attached.jpg|300px]]
 +
 
 +
4. Using the adapter provided, secure the temperature monitoring unit using the 2 screws.
 +
 
 +
[[File:ASF072X-T1_Thermal_Bracket.jpg|300px]]
 +
 
 +
5. Attach the adapter on the top of the bracket with 3 screws.
  
Coming Soon
+
[[File:ASF072X-T1_Thermal_Bracket_Installation.jpg|300px]]
  
==Step by Step Instruction==
+
6. Connect temperature monitoring unit to DHI-ASI7213X-T1.
 +
 
 +
[[File:DHI-ASI7213X-T1_Thermal_Unit_Connector.jpg|300px]]
 +
 
 +
6. Place the mounting plate (with thermal station attached to it) to the bracket. Secure all 4 screws that removed on step 2. Ensure that thermal station is fitting right with the front rubber gasket.
 +
 
 +
[[File:ASF072X-T1_Mounting_Plate_Attached.jpg|300px]]
 +
 
 +
7. Connect cables for the thermal station device. Power adapter will be placed underneath the base cover, there is a power wire provided to connect power to Kiosk device.
 +
 
 +
  Note: The power adapter wire that comes with the DHI-ASI7213X-T1 is long enough to connect all the way up to thermal station.
 +
 
 +
[[File:ASF072X-T1_Power_Adapter.jpg|300px]]
 +
 
 +
8. Install the rear cover and base cover. and then connect the power to turn on thermal station device.
  
1.
+
[[File:ASF072X-T1_Installed.jpg|300px]]

Latest revision as of 01:50, 29 July 2020

DHI-ASI7213X-T1 Physical Installation

Description

This guide will cover the physical installation of the thermal monitoring station.

Prerequisites

Step by Step Instruction

1. Remove the 2 screws on the rear cover, and then open it.

ASF072X-T1 Base Rear Cover.jpg

2. You will see 4 screws attached to the mounting plate. Remove all 4 screws.

DHI-ASI7213X-T1 Mounting Plate.jpg

3. Attach the mounting plate to DHI-ASI7213X-T1 unit.

DHI-ASI7213X-T1 Mounting Plate Attached.jpg

4. Using the adapter provided, secure the temperature monitoring unit using the 2 screws.

ASF072X-T1 Thermal Bracket.jpg

5. Attach the adapter on the top of the bracket with 3 screws.

ASF072X-T1 Thermal Bracket Installation.jpg

6. Connect temperature monitoring unit to DHI-ASI7213X-T1.

DHI-ASI7213X-T1 Thermal Unit Connector.jpg

6. Place the mounting plate (with thermal station attached to it) to the bracket. Secure all 4 screws that removed on step 2. Ensure that thermal station is fitting right with the front rubber gasket.

ASF072X-T1 Mounting Plate Attached.jpg

7. Connect cables for the thermal station device. Power adapter will be placed underneath the base cover, there is a power wire provided to connect power to Kiosk device.

 Note: The power adapter wire that comes with the DHI-ASI7213X-T1 is long enough to connect all the way up to thermal station.

ASF072X-T1 Power Adapter.jpg

8. Install the rear cover and base cover. and then connect the power to turn on thermal station device.

ASF072X-T1 Installed.jpg