Thermal/DHI-ASI7213X-T1/Instructions/Initial Setup Software

Revision as of 23:51, 5 June 2020 by Nicky Gunakan (talk | contribs) (Step by Step Instruction)

DHI-ASI7213X-T1 Initial Setup

Description

This guide will cover the initial thermal station setup which includes device initialization and creating secondary admin user.

Prerequisites

Video Instruction

Step by Step Instruction

1. Administrator password and an email should be set the first time the access controller is turned on or after factory reset.

DHI-ASI7213X-T1 DeviceInit.jpg

 Administrator and password set on this interface are used to log in to the web and local UI. 
The administrator password can be reset through the email address you entered if the administrator forgets the password.

2. Once device is initialized, it will bring up the homepage of the thermal station.

DHI-ASI7213X-T1 Homepage Details.jpg

DHI-ASI7213X-T1 Homepage Details2.jpg

3. Tap on DHI-ASI7213X-T1 Icon Mainmenu.jpg to access the main menu.

DHI-ASI7213X-T1 DeviceInit.jpg

4. You will see several option to login to the main menu. For initialization process, you can only use Admin option. 30px.

DHI-ASI7213X-T1 DeviceInit.jpg

5. Enter the password that you use to initialize the device.

6. Main menu page will launch.

DHI-ASI7213X-T1 Mainmenu.jpg

7. Tap on User.

DHI-ASI7213X-T1 Mainmenu User.jpg

8. Tap on New User. Enter all information for new user.

DHI-ASI7213X-T1 Mainmenu New User.jpg

New User parameter description:

DHI-ASI7213X-T1 User Parameter.jpg

DHI-ASI7213X-T1 User Parameter2.jpg


9. Tap on the DHI-ASI7213X-T1 Icon Checkmark.jpg icon on the top right corner to save it.