Thermal/DHI-ASI7213X-T1/Instructions/Update Firmware

Revision as of 19:47, 28 July 2020 by Marques.Phillips (talk | contribs) (Firmware Downloads)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Update Firmware: DHI-ASI7213X-T1

Description

The below instructions will show you how to update the normal and MCU firmware on the DHI-ASI7213X-T1.

Firmware Downloads

Important Notice: When upgrading, need to upgrade using all 3 of these firmware files

Firmware T1 MCU Firmware MCU Firmware

Step by Step Instructions

DHI-ASI7213X-T1 web image.pngSystemUI+USB Drive

Prerequisites

  • DHI-ASI7213X-T1
  • USB Drive(8GB or smaller)

Step by Step Instructions

1. Enable "File name extensions" on File Explorer and rename the MCU file to "update.bin"

Image (3).png

2. Login on the access control monitor.

DSC 0072.JPG DSC 0073.JPG

3. Tap "USB".

DSC 0074.JPG

4. Tap "USB Update".

DSC 0076.JPG

5. Confirm with the update.

DSC 0077.JPG

6. Wait for the update to finish, don't power off the device at this screen!

DSC 0078.JPG

7. Wait for the update to finish, don't power off the device at this screen!

DSC 0079.JPG

DHI-ASI7213X-T1 WebUI.pngWebUI

=Update Firmware via WebUI=

Prerequisites

  • DHI-ASI7213X-T1
  • LAN Access from a Windows PC
  • Internet Explorer or Chrome

Video Instructions

Step by Step Instructions

Download the firmware files for the device (3 in total):


1. Log into the webUI of the device by typing the IP address into Internet Explorer

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 1.jpg

2. Click Upgrade

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 2.jpg

3. Click Browse

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 3.jpg

4. Select the firmware file, click Open

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 4.jpg

5. Click Upgrade

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 5.jpg

A prompt will appear showing the status of the update:

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 6.jpg

A message will confirm a successful upgrade and the unit will reboot

Dahua Thermal Solution DHI ASI7213X T1 WebUI Update Firmware - 7.jpg

Repeat the process for all required firmware files

Troubleshooting

In the event the MCU firmware update fails:

Firmware Update error.png

  • Power down unit
  • Reconnect/secure the module
  • Power device on
  • Attempt Firmware upgrade again
  • Make sure the module is properly connected, then attempt the firmware update again