Thermal/Temperature Monitoring/Physical Setup

Revision as of 23:49, 23 April 2020 by Marques.Phillips (talk | contribs)

Temperature Monitoring Solution Physical Setup

Error creating thumbnail: File missing

Description

This guide will show the proper physical arrangement/setup of the devices for the Temperature Monitoring Solution

Video Instructions

Step by Step Instructions

Mounting Adapter Plates

The mounting brackets/plates must be installed to both the camera and black body device

  • RQW026-00 Brackets

  • Black body bracket installation

  • Thermal camera bracket installation

To attach the tripod:

  • Use the center hole to screw into tripod

  • Tripod installed

Suggested Physical Layout

  • Side view diagram

  • Top view diagram

  • Camera height: 2m (6.56 ft)

  • Black body height: 1.8m (5.9 ft)

  • Minimum distance between both: 3m (9 ft)

  • Side view diagram

  • Top view diagram

JQ-D70Z Black body Setup

  • Plug in the power and turn on

  • Allow the device to warm up to 35.0 C

Next Step

Physical setup is now complete you can continue with setup and programming:

If you're using an NVR, follow the steps to set up Thermal Monitoring solution with NVR

Retrieved from "https://DahuaWiki.com/index.php?title=Thermal/Temperature_Monitoring/Physical_Setup&oldid=62113"