Difference between revisions of "VideoLossAnalogandCVI"

(I connect the standard definition analog camera or the HDCVI camera to the device, there is no video output.)
Line 4: Line 4:
 
* Check camera power supplying, or camera data cable connection.
 
* Check camera power supplying, or camera data cable connection.
 
* For the product supports analog standard definition camera/HD camera, you need to go to the main menu*>Setting*>Camera*>Channel type to select corresponding channel type and then restart the DVR.
 
* For the product supports analog standard definition camera/HD camera, you need to go to the main menu*>Setting*>Camera*>Channel type to select corresponding channel type and then restart the DVR.
 +
* Check camera power supplying, data cable connection and etc. There might not be sufficient power from the power source. You can use a voltage tester if you have one on hand.
 +
* Check the length of cable run. Refer to the specifications for the limitations on the cable length.
 +
* This series device does not support the analog camera of all brands. Please make sure the device supports general standard definition analog camera.
 +
* If there is no video, check the coax connection. Unsecured faulty connections will result in no video or intermittent video.
  
 
[[Category:Troubleshoot]]
 
[[Category:Troubleshoot]]

Revision as of 17:54, 1 September 2016

I connect the standard definition analog camera or the HDCVI camera to the device, there is no video output.

There are following possibilities:

  • Check camera power supplying, or camera data cable connection.
  • For the product supports analog standard definition camera/HD camera, you need to go to the main menu*>Setting*>Camera*>Channel type to select corresponding channel type and then restart the DVR.
  • Check camera power supplying, data cable connection and etc. There might not be sufficient power from the power source. You can use a voltage tester if you have one on hand.
  • Check the length of cable run. Refer to the specifications for the limitations on the cable length.
  • This series device does not support the analog camera of all brands. Please make sure the device supports general standard definition analog camera.
  • If there is no video, check the coax connection. Unsecured faulty connections will result in no video or intermittent video.