Difference between revisions of "Video Intercom/SIP 2.0/Multiple VTH and VTO One-Key Config Setup"
| Line 12: | Line 12: | ||
==Step by Step Instructions== | ==Step by Step Instructions== | ||
| − | 1. | + | 1. Select your region by tapping on the country |
[[file:2.0 Multiple VDP One Key Config-1.png|900px]] | [[file:2.0 Multiple VDP One Key Config-1.png|900px]] | ||
| − | 2. | + | 2. Select the country and tap on '''OK''' |
[[file:2.0 Multiple VDP One Key Config-2.png|900px]] | [[file:2.0 Multiple VDP One Key Config-2.png|900px]] | ||
| − | 3. | + | 3. Then tap on '''OK''' |
[[file:2.0 Multiple VDP One Key Config-3.png|900px]] | [[file:2.0 Multiple VDP One Key Config-3.png|900px]] | ||
| − | 4. | + | 4. Tap on '''Villa''' before clicking on '''OK''' |
[[file:2.0 Multiple VDP One Key Config-4.png|900px]] | [[file:2.0 Multiple VDP One Key Config-4.png|900px]] | ||
| − | 5. | + | 5. Select '''First-time Config''' and then '''OK''' |
[[file:2.0 Multiple VDP One Key Config-5.png|900px]] | [[file:2.0 Multiple VDP One Key Config-5.png|900px]] | ||
| − | 6. | + | 6. The VTH will then receive a DHCP address from the network |
[[file:2.0 Multiple VDP One Key Config-6.png|900px]] | [[file:2.0 Multiple VDP One Key Config-6.png|900px]] | ||
| − | 7. | + | 7. Click on '''Next''' or select Static IP if you have a specific IP to give it |
[[file:2.0 Multiple VDP One Key Config-7.png|900px]] | [[file:2.0 Multiple VDP One Key Config-7.png|900px]] | ||
| − | 8. | + | 8. '''Set VTH Password''' Will initialize all the VTHs on the network with this password. Also enter an E-Mail to reset passwords. Tap on '''Next''' |
| + | |||
| + | '''Note: VTHs will require a 6-digit numerical password''' | ||
[[file:2.0 Multiple VDP One Key Config-8.png|900px]] | [[file:2.0 Multiple VDP One Key Config-8.png|900px]] | ||
| − | 9. | + | 9. '''Set VTO Password''' Will initialize all the VTOs on the network with this password. The E-Mail will re-enter itself. Tap on '''Next''' |
| + | |||
| + | '''Note: The VTO password requires a 8-character password. The password must be alpha-numerical''' | ||
[[file:2.0 Multiple VDP One Key Config-9.png|900px]] | [[file:2.0 Multiple VDP One Key Config-9.png|900px]] | ||
| − | 10. | + | 10. |
[[file:2.0 Multiple VDP One Key Config-10.png|900px]] | [[file:2.0 Multiple VDP One Key Config-10.png|900px]] | ||
Revision as of 21:36, 1 November 2021
Contents
How to Setup One Key Config
Description
This article will go over the new One Key Config setup with multiple devices.
Prerequisites
- VTH with the One Key Config feature
- VTOs with SIP 2.0 Firmware
Video Instructions
Step by Step Instructions
1. Select your region by tapping on the country
2. Select the country and tap on OK
3. Then tap on OK
4. Tap on Villa before clicking on OK
5. Select First-time Config and then OK
6. The VTH will then receive a DHCP address from the network
7. Click on Next or select Static IP if you have a specific IP to give it
8. Set VTH Password Will initialize all the VTHs on the network with this password. Also enter an E-Mail to reset passwords. Tap on Next
Note: VTHs will require a 6-digit numerical password
9. Set VTO Password Will initialize all the VTOs on the network with this password. The E-Mail will re-enter itself. Tap on Next
Note: The VTO password requires a 8-character password. The password must be alpha-numerical
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
