Video Intercom/SIP 2.0/Multiple VTH and VTO One-Key Config Setup
Contents
How to Setup One Key Config
Description
This article will go over the new One Key Config setup with multiple devices.
Prerequisites
- VTH with the One Key Config feature
- VTOs with SIP 2.0 Firmware
Video Instructions
Step by Step Instructions
1. Select your region by tapping on the country
2. Select the country and tap on OK
3. Then tap on OK
4. Tap on Villa before clicking on OK
5. Select First-time Config and then OK
6. The VTH will then receive a DHCP address from the network
7. Click on Next or select Static IP if you have a specific IP to give it
8. Set VTH Password Will initialize all the VTHs on the network with this password. Also enter an E-Mail to reset passwords. Tap on Next
Note: VTHs will require a 6-digit numerical password
9. Set VTO Password Will initialize all the VTOs on the network with this password. The E-Mail will re-enter itself. Tap on Next
Note: The VTO password requires a 8-character password. The password must be alpha-numerical
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
