|
|
(68 intermediate revisions by 5 users not shown) |
Line 1: |
Line 1: |
− | ==IVS - Intelligent Video Surveillance== | + | ==IVS - Intelligent Video System== |
| ==About== | | ==About== |
| The Face Capture, Perimeter Protection, and IVS functions cannot be used at the same time, only one | | The Face Capture, Perimeter Protection, and IVS functions cannot be used at the same time, only one |
| Analytics+ or IVS function can be used at a time. In addition, the Smart H.265+ and the Smart H.264+ cannot | | Analytics+ or IVS function can be used at a time. In addition, the Smart H.265+ and the Smart H.264+ cannot |
| be used simultaneously with either an Analytics+ or an IVS feature. | | be used simultaneously with either an Analytics+ or an IVS feature. |
− | ==IVS Features==
| + | |
− | ===Analytics+===
| + | *After smart codec is enabled, the device would stop supporting the third bit stream, ROI, and smart event detection, and the actual interface shall prevail. |
− | {| class="wikitable"
| + | |
− | !colspan="7"|IVS
| + | ==Setup Suggestions== |
− | |-
| + | [[file:Analytics_Plus_Infograph_Edit.png|thumb]] |
− | !colspan="2"|Interface
| + | *The target should be less than 10% of the image. |
− | !SystemUI (Old)
| + | *The target size in the image should not be less than 50×50 pixels. |
− | !SystemUI (New)
| + | *Brightness difference between the target and the background should not be less than 10 greyscale. |
− | !WebUI
| + | *The target should be continuously present in the image for no less than two seconds, and Event 134 the moving distance of the target should be larger than its width and no less than 15 pixels (CIF image). |
− | !SmartPSS 1.16
| + | *Reduce the complexity of surveillance scene as possible as you can. Analytics analysis function is not recommended to be used in scene with dense targets and frequent illumination change. |
− | !SmartPSS 2.0
| + | *Avoid areas such as glass, reflective ground, water surface, and areas interfered by branch, shadow and mosquito. Avoid backlight scene and direct light. |
− | |-
| + | |
− | ! style="text-align:center; text:bold" |Face Detect
| + | ==Smart Plan== |
− | | style="text-align:center;" |[[file:IVSIconFaceRecognition.png|65px|Face Detect]]
| + | {| |
− | |[[IVS2.0:SystemUI/Face_Detect|SystemUI Setup]]
| + | | style="text-align:center;" |[[file:IVS_WebUI_Icons-Face_Detection.png|Face Detection]]<br />Face Detection |
− | |[[IVS2.0:NewSystemUI/Face_Detect|SystemUI Setup]]
| + | | style="text-align:center;" |[[file:IVS_WebUI_Icons-Heatmap.png|Heat Map]]<br />Heat Map |
− | |[[IVS2.0:WebUI/Face_Detect|Internet Explorer Setup]]
| + | | style="text-align:center;" |[[file:IVS_WebUI_Icons-IVS.png|IVS]]<br />IVS |
− | ||[[IVS2.0:SmartPSS1.16/Face_Detect|SmartPSS 1.16 Setup]]
| + | | style="text-align:center;" |[[file:IVS_WebUI_Icons-People_Counting.png|People Counting]]<br />People Counting |
− | ||[[IVS2.0:SmartPSS1.16/Face_Detect|SmartPSS 2.00 Setup]]
| + | | style="text-align:center;" |[[file:IVS_WebUI_Icons-Stereo_Vision.png|Stereo Vision]]<br />Stereo Vision |
− | |-
| + | | style="text-align:center;" |[[file:IVS_WebUI_Icons-Stereoscopic_Behavior_Analysis.png|Stereoscopic Behavior Analysis]]<br />Behavior Analysis |
− | ! style="text-align:center; text:bold" |Tripwire
| + | | style="text-align:center;" |[[file:IVS_WebUI_Icons-Video_Structralization.png|Video Structuralization]]<br />Video Structuralization |
− | | style="text-align:center;" |[[file:IVSIconTripwire.png|65px|Tripwire]] | + | | style="text-align:center;" |[[file:IVS_WebUI_Icons-Crowd_Map.png|Crowd Map]]<br />Crowd Map |
− | |[[IVS2.0:SystemUI/Tripwire|SystemUI Setup]]
| + | | style="text-align:center;" |[[file:IVS_WebUI_Icons-ANPR.png|ANPR]]<br />ANPR |
− | |[[IVS2.0:NewSystemUI/Tripwire|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Tripwire|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Tripwire|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Tripwire|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |Intrusion
| |
− | | style="text-align:center;" |[[file:IVSIconIntrusion.png|65px|Intrusion]] | |
− | |[[IVS2.0:SystemUI/Intrusion|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/Intrusion|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Intrusion|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Intrusion|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Intrusion|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |Abandoned/Missing
| |
− | | style="text-align:center;" |[[file:IVSIconMissingAbandonDetection.png|65px|Abandoned/Missing]] | |
− | |[[IVS2.0:SystemUI/Abandoned_Missing|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/Abandoned_Missing|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Abandoned_Missing|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Abandoned_Missing|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Abandoned_Missing|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |People Counting
| |
− | | style="text-align:center;" |[[file:IVSIconPeopleCounting.png|65px|People Counting]] | |
− | |[[IVS2.0:SystemUI/People_Counting|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/People_Counting|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/People_Counting|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/People_Counting|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS2.00/People_Counting|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |Heatmap
| |
− | | style="text-align:center;" |[[file:IVSIconHeatMap.png|65px|Heatmap]] | |
− | |[[IVS2.0:SystemUI/Heatmap|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/Heatmap|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Heatmap|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Heatmap|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Heatmap|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |Auto Track
| |
− | | style="text-align:center;" |[[file:IVSIconSmartTracking.png|65px|Auto Track]] | |
− | |[[IVS2.0:SystemUI/PTZ_IVS_Auto_Tracking|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/PTZ_IVS_Auto_Tracking|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/PTZ_IVS_Auto_Tracking|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/PTZ_IVS_Auto_Tracking|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/PTZ_IVS_Auto_Tracking|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |Scene Change
| |
− | | style="text-align:center;" |[[file:IVSIconSceneChange.png|65px|Scene Change]] | |
− | |[[IVS2.0:SystemUI/Scene_Change|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/Scene_Change|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Scene_Change|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Scene_Change|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Scene_Change|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |Fast Moving
| |
− | | style="text-align:center;" |[[file:fastmovingIcon.png|65px|Fast Moving]] | |
− | |[[IVS2.0:SystemUI/Fast_Moving|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/Fast_Moving|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Fast_Moving|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Fast_Moving|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Fast_Moving|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |ePTZ
| |
− | | style="text-align:center;" |[[file:ePTZIcon.PNG|65px|ePTZ]] | |
− | |[[IVS2.0:SystemUI/ePTZ|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/ePTZ|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/ePTZ|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/ePTZ|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/ePTZ|SmartPSS 2.00 Setup]]
| |
| |} | | |} |
− | ===Advanced IVS=== | + | ==Global IVS== |
| + | *[[IVS/Global_Setup|Global IVS Setup Instructions]] |
| + | ==Device List== |
| + | *[[IVS/Device_List|IVS Device List]] |
| + | |
| + | ==Names== |
| {| class="wikitable" | | {| class="wikitable" |
− | !colspan="7"|IVS | + | !|Name |
− | |- | + | !colspan="4"|Also Known As |
− | !colspan="2"|Interface | |
− | !SystemUI (Old)
| |
− | !SystemUI (New)
| |
− | !WebUI
| |
− | !SmartPSS 1.16
| |
− | !SmartPSS 2.0
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |Face Detect
| |
− | | style="text-align:center;" |[[file:IVSIconFaceRecognition.png|65px|Face Detect]]
| |
− | |[[IVS2.0:SystemUI/Face_Detect|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/Face_Detect|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Face_Detect|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Face_Detect|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Face_Detect|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |Tripwire
| |
− | | style="text-align:center;" |[[file:IVSIconTripwire.png|65px|Tripwire]]
| |
− | |[[IVS2.0:SystemUI/Tripwire|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/Tripwire|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Tripwire|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Tripwire|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Tripwire|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |Intrusion
| |
− | | style="text-align:center;" |[[file:IVSIconIntrusion.png|65px|Intrusion]]
| |
− | |[[IVS2.0:SystemUI/Intrusion|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/Intrusion|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Intrusion|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Intrusion|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Intrusion|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |Abandoned/Missing
| |
− | | style="text-align:center;" |[[file:IVSIconMissingAbandonDetection.png|65px|Abandoned/Missing]]
| |
− | |[[IVS2.0:SystemUI/Abandoned_Missing|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/Abandoned_Missing|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Abandoned_Missing|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Abandoned_Missing|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Abandoned_Missing|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |People Counting
| |
− | | style="text-align:center;" |[[file:IVSIconPeopleCounting.png|65px|People Counting]]
| |
− | |[[IVS2.0:SystemUI/People_Counting|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/People_Counting|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/People_Counting|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/People_Counting|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS2.00/People_Counting|SmartPSS 2.00 Setup]]
| |
| |- | | |- |
− | ! style="text-align:center; text:bold" |Heatmap | + | !|Video Structuralization |
− | | style="text-align:center;" |[[file:IVSIconHeatMap.png|65px|Heatmap]] | + | |Video Metadata |
− | |[[IVS2.0:SystemUI/Heatmap|SystemUI Setup]]
| + | |Facial Attributes (DNA) |
− | |[[IVS2.0:NewSystemUI/Heatmap|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Heatmap|Internet Explorer Setup]] | |
− | ||[[IVS2.0:SmartPSS1.16/Heatmap|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Heatmap|SmartPSS 2.00 Setup]]
| |
| |- | | |- |
− | ! style="text-align:center; text:bold" |Auto Track | + | !|Smart Tracking |
− | | style="text-align:center;" |[[file:IVSIconSmartTracking.png|65px|Auto Track]] | + | |Alarm Track |
− | |[[IVS2.0:SystemUI/PTZ_IVS_Auto_Tracking|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/PTZ_IVS_Auto_Tracking|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/PTZ_IVS_Auto_Tracking|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/PTZ_IVS_Auto_Tracking|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/PTZ_IVS_Auto_Tracking|SmartPSS 2.00 Setup]]
| |
| |- | | |- |
− | ! style="text-align:center; text:bold" |Scene Change | + | !|Image Attribute Extraction |
− | | style="text-align:center;" |[[file:IVSIconSceneChange.png|65px|Scene Change]]
| + | |Human Body attributes |
− | |[[IVS2.0:SystemUI/Scene_Change|SystemUI Setup]] | + | |Non-Motor Vehicle attributes |
− | |[[IVS2.0:NewSystemUI/Scene_Change|SystemUI Setup]] | + | |Vehicle attributes |
− | |[[IVS2.0:WebUI/Scene_Change|Internet Explorer Setup]] | |
− | ||[[IVS2.0:SmartPSS1.16/Scene_Change|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Scene_Change|SmartPSS 2.00 Setup]]
| |
| |- | | |- |
− | ! style="text-align:center; text:bold" |Fast Moving | + | !|SmartSearch |
− | | style="text-align:center;" |[[file:fastmovingIcon.png|65px|Fast Moving]] | + | |AI |
− | |[[IVS2.0:SystemUI/Fast_Moving|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/Fast_Moving|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Fast_Moving|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Fast_Moving|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Fast_Moving|SmartPSS 2.00 Setup]]
| |
| |- | | |- |
− | ! style="text-align:center; text:bold" |ePTZ | + | !|Face Capture |
− | | style="text-align:center;" |[[file:ePTZIcon.PNG|65px|ePTZ]] | + | |Face Detect |
− | |[[IVS2.0:SystemUI/ePTZ|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/ePTZ|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/ePTZ|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/ePTZ|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/ePTZ|SmartPSS 2.00 Setup]]
| |
| |} | | |} |
− | ===Premium IVS=== | + | |
| + | ==Instructions== |
| {| class="wikitable" | | {| class="wikitable" |
− | !colspan="7"|IVS | + | !|Name |
− | |-
| + | !|Icon |
− | !colspan="2"|Interface | + | !|Type |
− | !SystemUI (Old)
| + | !|Description |
− | !SystemUI (New)
| + | !|Setup |
− | !WebUI
| + | !|Playback |
− | !SmartPSS 1.16
| |
− | !SmartPSS 2.0 | |
− | |- | |
− | ! style="text-align:center; text:bold" |Face Detect | |
− | | style="text-align:center;" |[[file:IVSIconFaceRecognition.png|65px|Face Detect]]
| |
− | |[[IVS2.0:SystemUI/Face_Detect|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/Face_Detect|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Face_Detect|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Face_Detect|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Face_Detect|SmartPSS 2.00 Setup]]
| |
− | |- | |
− | ! style="text-align:center; text:bold" |Tripwire | |
− | | style="text-align:center;" |[[file:IVSIconTripwire.png|65px|Tripwire]]
| |
− | |[[IVS2.0:SystemUI/Tripwire|SystemUI Setup]] | |
− | |[[IVS2.0:NewSystemUI/Tripwire|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Tripwire|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Tripwire|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Tripwire|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |Intrusion | |
− | | style="text-align:center;" |[[file:IVSIconIntrusion.png|65px|Intrusion]] | |
− | |[[IVS2.0:SystemUI/Intrusion|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/Intrusion|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Intrusion|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Intrusion|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Intrusion|SmartPSS 2.00 Setup]]
| |
| |- | | |- |
− | ! style="text-align:center; text:bold" |Abandoned/Missing | + | !|Tripwire |
− | | style="text-align:center;" |[[file:IVSIconMissingAbandonDetection.png|65px|Abandoned/Missing]]
| + | |[[file:IVSIconTripwire.png|65px|Tripwire]] |
− | |[[IVS2.0:SystemUI/Abandoned_Missing|SystemUI Setup]] | + | |Premium IVS |
− | |[[IVS2.0:NewSystemUI/Abandoned_Missing|SystemUI Setup]]
| + | |Tripwire will detect if there is any object crossing the warning line, it can support different direction selection, such as A->B, B->A and bidirectional, and it can activate record , snapshot and alarm according to the judgment result |
− | |[[IVS2.0:WebUI/Abandoned_Missing|Internet Explorer Setup]]
| + | |[https://dahuawiki.com/Tripwire <ul class="fa-ul"> <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/Abandoned_Missing|SmartPSS 1.16 Setup]]
| + | |[https://dahuawiki.com/Playback/SmartSearch/IVS <ul class="fa-ul"> <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/Abandoned_Missing|SmartPSS 2.00 Setup]]
| |
− | |- | |
− | ! style="text-align:center; text:bold" |People Counting
| |
− | | style="text-align:center;" |[[file:IVSIconPeopleCounting.png|65px|People Counting]]
| |
− | |[[IVS2.0:SystemUI/People_Counting|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/People_Counting|SystemUI Setup]] | |
− | |[[IVS2.0:WebUI/People_Counting|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/People_Counting|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS2.00/People_Counting|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |Heatmap
| |
− | | style="text-align:center;" |[[file:IVSIconHeatMap.png|65px|Heatmap]]
| |
− | |[[IVS2.0:SystemUI/Heatmap|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/Heatmap|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Heatmap|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Heatmap|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Heatmap|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |Auto Track
| |
− | | style="text-align:center;" |[[file:IVSIconSmartTracking.png|65px|Auto Track]]
| |
− | |[[IVS2.0:SystemUI/PTZ_IVS_Auto_Tracking|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/PTZ_IVS_Auto_Tracking|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/PTZ_IVS_Auto_Tracking|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/PTZ_IVS_Auto_Tracking|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/PTZ_IVS_Auto_Tracking|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |Scene Change
| |
− | | style="text-align:center;" |[[file:IVSIconSceneChange.png|65px|Scene Change]]
| |
− | |[[IVS2.0:SystemUI/Scene_Change|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/Scene_Change|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Scene_Change|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Scene_Change|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Scene_Change|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |Fast Moving
| |
− | | style="text-align:center;" |[[file:fastmovingIcon.png|65px|Fast Moving]]
| |
− | |[[IVS2.0:SystemUI/Fast_Moving|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/Fast_Moving|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/Fast_Moving|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Fast_Moving|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/Fast_Moving|SmartPSS 2.00 Setup]]
| |
− | |-
| |
− | ! style="text-align:center; text:bold" |ePTZ
| |
− | | style="text-align:center;" |[[file:ePTZIcon.PNG|65px|ePTZ]]
| |
− | |[[IVS2.0:SystemUI/ePTZ|SystemUI Setup]]
| |
− | |[[IVS2.0:NewSystemUI/ePTZ|SystemUI Setup]]
| |
− | |[[IVS2.0:WebUI/ePTZ|Internet Explorer Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/ePTZ|SmartPSS 1.16 Setup]]
| |
− | ||[[IVS2.0:SmartPSS1.16/ePTZ|SmartPSS 2.00 Setup]]
| |
− | |}
| |
− | ===x===
| |
− | {| class="wikitable"
| |
− | !colspan="7"|IVS
| |
| |- | | |- |
− | !colspan="2"|Interface | + | !|Intrusion |
− | !SystemUI (Old)
| + | |[[file:IVSIconIntrusion.png|65px|Intrusion]] |
− | !SystemUI (New)
| + | |Premium IVS |
− | !WebUI
| + | |Intrusion is used to detect that some sensitive areas can’t be casually entered, exited or crossed in the monitoring scenario, it will trigger device alarm if the target object touches the detection line. |
− | !SmartPSS 1.16
| + | |[https://dahuawiki.com/IVS:Intrusion <ul class="fa-ul"> <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>] |
− | !SmartPSS 2.0
| + | |[https://dahuawiki.com/Playback/SmartSearch/IVS <ul class="fa-ul"> <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>] |
| |- | | |- |
− | ! style="text-align:center; text:bold" |Face Detect | + | !|Abandoned/Missing Object |
− | | style="text-align:center;" |[[file:IVSIconFaceRecognition.png|65px|Face Detect]]
| + | |[[file:IVSIconMissingAbandonDetection.png|65px|Abandoned/Missing]] |
− | |[[IVS2.0:SystemUI/Face_Detect|SystemUI Setup]] | + | |Premium IVS |
− | |[[IVS2.0:NewSystemUI/Face_Detect|SystemUI Setup]] | + | |Abandoned/missing function is used to detect if there are people, vehicle and objects abandoned or missing in some areas in the monitoring scene; it can trigger an alarm when the target object stays or is missing for a time which exceeds the desired time. |
− | |[[IVS2.0:WebUI/Face_Detect|Internet Explorer Setup]]
| + | |[https://dahuawiki.com/IVS:Abandoned_Missing_Object <ul class="fa-ul"> <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/Face_Detect|SmartPSS 1.16 Setup]] | + | |[https://dahuawiki.com/Playback/SmartSearch/IVS <ul class="fa-ul"> <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/Face_Detect|SmartPSS 2.00 Setup]]
| |
| |- | | |- |
− | ! style="text-align:center; text:bold" |Tripwire | + | !|Scene Change |
− | | style="text-align:center;" |[[file:IVSIconTripwire.png|65px|Tripwire]]
| + | |[[file:IVSIconSceneChange.png|65px|IVS:Scene_Change]] |
− | |[[IVS2.0:SystemUI/Tripwire|SystemUI Setup]] | + | |Premium IVS |
− | |[[IVS2.0:NewSystemUI/Tripwire|SystemUI Setup]] | + | |Scene change function is used to detect abnormality of monitoring scene, such as camera being blocked, moved, intense light change and so on. The Analytics library will make comparison between the original picture and the picture of the camera which has been blocked or moved, and judge if there is similarity; it will generate alarm if there is no matched similarity |
− | |[[IVS2.0:WebUI/Tripwire|Internet Explorer Setup]]
| + | |[https://dahuawiki.com/IVS:Scene_Change <ul class="fa-ul"> <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/Tripwire|SmartPSS 1.16 Setup]]
| + | |[https://dahuawiki.com/Playback <ul class="fa-ul"> <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/Tripwire|SmartPSS 2.00 Setup]]
| |
| |- | | |- |
− | ! style="text-align:center; text:bold" |Intrusion | + | !|Auto Tracking |
− | | style="text-align:center;" |[[file:IVSIconIntrusion.png|65px|Intrusion]]
| + | |[[file:IVSIconSmartTracking.png|65px|Auto Track]] |
− | |[[IVS2.0:SystemUI/Intrusion|SystemUI Setup]] | + | |Advanced IVS |
− | |[[IVS2.0:NewSystemUI/Intrusion|SystemUI Setup]] | + | |PTZ tracking is an innovative feature that transforms manually controlled PTZ cameras into automated tracking systems that keep an moving object in focus and centered in the frame. It follows the object where stationary cameras would lose the object once out of the fixed cameras field of view. |
− | |[[IVS2.0:WebUI/Intrusion|Internet Explorer Setup]]
| + | |[https://dahuawiki.com/IVS:Auto_Track <ul class="fa-ul"> <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/Intrusion|SmartPSS 1.16 Setup]]
| + | |[https://dahuawiki.com/Playback <ul class="fa-ul"> <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/Intrusion|SmartPSS 2.00 Setup]]
| |
| |- | | |- |
− | ! style="text-align:center; text:bold" |Abandoned/Missing | + | !|Smart Tracking |
− | | style="text-align:center;" |[[file:IVSIconMissingAbandonDetection.png|65px|Abandoned/Missing]]
| + | |[[file:Smart_Tracking.jpg|65px|IVS:Smart_Track]] |
− | |[[IVS2.0:SystemUI/Abandoned_Missing|SystemUI Setup]] | + | |Premium IVS |
− | |[[IVS2.0:NewSystemUI/Abandoned_Missing|SystemUI Setup]] | + | |Smart tracking is the linked monitoring between the PTZ camera and other devices, such as Radar and Thermal camera. When the camera detects the target, it sends signals to the PTZ camera for tracking. |
− | |[[IVS2.0:WebUI/Abandoned_Missing|Internet Explorer Setup]]
| + | |[https://dahuawiki.com/IVS:Smart_Track <ul class="fa-ul"> <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/Abandoned_Missing|SmartPSS 1.16 Setup]]
| + | |[https://dahuawiki.com/Playback <ul class="fa-ul"> <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/Abandoned_Missing|SmartPSS 2.00 Setup]]
| |
| |- | | |- |
− | ! style="text-align:center; text:bold" |People Counting | + | !|Thermal Camera IVS |
− | | style="text-align:center;" |[[file:IVSIconPeopleCounting.png|65px|People Counting]]
| + | |[[file:Thermal_Camera_IVS.jpg|65px|IVS:Thermal_IVS]] |
− | |[[IVS2.0:SystemUI/People_Counting|SystemUI Setup]] | + | |Premium IVS |
− | |[[IVS2.0:NewSystemUI/People_Counting|SystemUI Setup]] | + | |In some special environment, the Thermal camera can realize some IVS function that the normal cameral can’t, such as the object missing/object abandoned/intrusion/tripwire |
− | |[[IVS2.0:WebUI/People_Counting|Internet Explorer Setup]]
| + | |[https://dahuawiki.com/IVS:Thermal_IVS <ul class="fa-ul"> <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/People_Counting|SmartPSS 1.16 Setup]]
| + | |[https://dahuawiki.com/Playback <ul class="fa-ul"> <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS2.00/People_Counting|SmartPSS 2.00 Setup]]
| |
| |- | | |- |
− | ! style="text-align:center; text:bold" |Heatmap | + | !|Face Detection |
− | | style="text-align:center;" |[[file:IVSIconHeatMap.png|65px|Heatmap]]
| + | |[[File:IVSIconFaceRecognition.png|65px|IVS:Face_Detection]] |
− | |[[IVS2.0:SystemUI/Heatmap|SystemUI Setup]] | + | |Advanced IVS |
− | |[[IVS2.0:NewSystemUI/Heatmap|SystemUI Setup]] | + | |Face detection is to detect if there is any human face appearing in the video, and capture the face then send it to the NVR for analysis and processing, it can activate snapshot, record and alarm. |
− | |[[IVS2.0:WebUI/Heatmap|Internet Explorer Setup]]
| + | |[https://dahuawiki.com/IVS:Face_Detection <ul class="fa-ul"> <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/Heatmap|SmartPSS 1.16 Setup]]
| + | |[https://dahuawiki.com/Playback/SmartSearch/Face_Detection <ul class="fa-ul"> <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/Heatmap|SmartPSS 2.00 Setup]]
| |
| |- | | |- |
− | ! style="text-align:center; text:bold" |Auto Track | + | !|People Counting |
− | | style="text-align:center;" |[[file:IVSIconSmartTracking.png|65px|Auto Track]]
| + | |[[file:IVSIconPeopleCounting.png|65px|IVS:People_Counting]] |
− | |[[IVS2.0:SystemUI/PTZ_IVS_Auto_Tracking|SystemUI Setup]] | + | |Advanced IVS |
− | |[[IVS2.0:NewSystemUI/PTZ_IVS_Auto_Tracking|SystemUI Setup]] | + | |Provides people counting, region people counting, linkage alarm, and statement generation functions. |
− | |[[IVS2.0:WebUI/PTZ_IVS_Auto_Tracking|Internet Explorer Setup]]
| + | |[https://dahuawiki.com/IVS:People_Counting <ul class="fa-ul"> <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/PTZ_IVS_Auto_Tracking|SmartPSS 1.16 Setup]]
| + | |[https://dahuawiki.com/Playback/SmartSearch/People_Counting <ul class="fa-ul"> <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/PTZ_IVS_Auto_Tracking|SmartPSS 2.00 Setup]]
| |
| |- | | |- |
− | ! style="text-align:center; text:bold" |Scene Change | + | !|Perimeter |
− | | style="text-align:center;" |[[file:IVSIconSceneChange.png|65px|Scene Change]]
| + | |[[File:Perimeter_Protection_Icon.jpg|65px|IVS:Perimeter]] |
− | |[[IVS2.0:SystemUI/Scene_Change|SystemUI Setup]] | + | |Analytics+ |
− | |[[IVS2.0:NewSystemUI/Scene_Change|SystemUI Setup]] | + | |Dahua Perimeter Protection technology can recognize human and vehicle accurately. In restricted area (such as pedestrian area and vehicle area), the false alarms of Analytics detection based on target type (such as tripwire, intrusion) are largely reduced. |
− | |[[IVS2.0:WebUI/Scene_Change|Internet Explorer Setup]]
| + | |[https://dahuawiki.com/IVS:Perimeter <ul class="fa-ul"> <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/Scene_Change|SmartPSS 1.16 Setup]]
| + | |[https://dahuawiki.com/Playback <ul class="fa-ul"> <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/Scene_Change|SmartPSS 2.00 Setup]]
| |
| |- | | |- |
− | ! style="text-align:center; text:bold" |Fast Moving | + | !|Heat-map |
− | | style="text-align:center;" |[[file:fastmovingIcon.png|65px|Fast Moving]]
| + | |[[file:IVSIconHeatMap.png|65px|IVS:Heatmap]] |
− | |[[IVS2.0:SystemUI/Fast_Moving|SystemUI Setup]] | + | |Advanced IVS |
− | |[[IVS2.0:NewSystemUI/Fast_Moving|SystemUI Setup]] | + | |It is used to detect the level of motion of moving objects in a certain time. Supports the statistics of the cumulative population density within the set time range, and displays in space with different colors. |
− | |[[IVS2.0:WebUI/Fast_Moving|Internet Explorer Setup]]
| + | |[https://dahuawiki.com/IVS:Heatmap <ul class="fa-ul"> <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/Fast_Moving|SmartPSS 1.16 Setup]] | + | |[https://dahuawiki.com/Playback/SmartSearch/Heat_Map <ul class="fa-ul"> <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/Fast_Moving|SmartPSS 2.00 Setup]]
| |
| |- | | |- |
− | ! style="text-align:center; text:bold" |ePTZ | + | !|LPC & LPR |
− | | style="text-align:center;" |[[file:ePTZIcon.PNG|65px|ePTZ]]
| + | |[[File:Traffic_Enforcement.jpg|65px|IVS:Traffic]] |
− | |[[IVS2.0:SystemUI/ePTZ|SystemUI Setup]] | + | |Premium IVS |
− | |[[IVS2.0:NewSystemUI/ePTZ|SystemUI Setup]] | + | |Analysis the traffic situation according to the traffic flow |
− | |[[IVS2.0:WebUI/ePTZ|Internet Explorer Setup]]
| + | |[https://dahuawiki.com/IVS:Traffic <ul class="fa-ul"> <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/ePTZ|SmartPSS 1.16 Setup]]
| + | |[https://dahuawiki.com/Playback <ul class="fa-ul"> <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>] |
− | ||[[IVS2.0:SmartPSS1.16/ePTZ|SmartPSS 2.00 Setup]]
| |
| |} | | |} |
The Face Capture, Perimeter Protection, and IVS functions cannot be used at the same time, only one
Analytics+ or IVS function can be used at a time. In addition, the Smart H.265+ and the Smart H.264+ cannot
be used simultaneously with either an Analytics+ or an IVS feature.