Difference between revisions of "IVS"

(→‎Setup Suggestions)
 
(11 intermediate revisions by 4 users not shown)
Line 1: Line 1:
−
==IVS - Intelligent Video Surveillance==
+
==IVS - Intelligent Video System==
 
==About==
 
==About==
 
The Face Capture, Perimeter Protection, and IVS functions cannot be used at the same time, only one
 
The Face Capture, Perimeter Protection, and IVS functions cannot be used at the same time, only one
Line 6: Line 6:
  
 
*After smart codec is enabled, the device would stop supporting the third bit stream, ROI, and smart event detection, and the actual interface shall prevail.
 
*After smart codec is enabled, the device would stop supporting the third bit stream, ROI, and smart event detection, and the actual interface shall prevail.
−
 
−
*'''The "Loitering Detection" IVS rule is present on several Dahua North America devices at this time. However, this feature does not currently work, and is not advertised as a feature in any of the spec sheets.'''
 
  
 
==Setup Suggestions==
 
==Setup Suggestions==
−
[[file:IVS_Infograph_Updated_2.24.2020.png|thumb]]
+
[[file:Analytics_Plus_Infograph_Edit.png|thumb]]
 
*The target should be less than 10% of the image.
 
*The target should be less than 10% of the image.
 
*The target size in the image should not be less than 50×50 pixels.  
 
*The target size in the image should not be less than 50×50 pixels.  
 
*Brightness difference between the target and the background should not be less than 10 greyscale.
 
*Brightness difference between the target and the background should not be less than 10 greyscale.
 
*The target should be continuously present in the image for no less than two seconds, and Event 134 the moving distance of the target should be larger than its width and no less than 15 pixels (CIF image).
 
*The target should be continuously present in the image for no less than two seconds, and Event 134 the moving distance of the target should be larger than its width and no less than 15 pixels (CIF image).
−
*Reduce the complexity of surveillance scene as possible as you can. Intelligent analysis function is not recommended to be used in scene with dense targets and frequent illumination change.
+
*Reduce the complexity of surveillance scene as possible as you can. Analytics analysis function is not recommended to be used in scene with dense targets and frequent illumination change.
 
*Avoid areas such as glass, reflective ground, water surface, and areas interfered by branch, shadow and mosquito. Avoid backlight scene and direct light.
 
*Avoid areas such as glass, reflective ground, water surface, and areas interfered by branch, shadow and mosquito. Avoid backlight scene and direct light.
  
Line 26: Line 24:
 
| style="text-align:center;" |[[file:IVS_WebUI_Icons-Stereo_Vision.png|Stereo Vision]]<br />Stereo Vision
 
| style="text-align:center;" |[[file:IVS_WebUI_Icons-Stereo_Vision.png|Stereo Vision]]<br />Stereo Vision
 
| style="text-align:center;" |[[file:IVS_WebUI_Icons-Stereoscopic_Behavior_Analysis.png|Stereoscopic Behavior Analysis]]<br />Behavior Analysis
 
| style="text-align:center;" |[[file:IVS_WebUI_Icons-Stereoscopic_Behavior_Analysis.png|Stereoscopic Behavior Analysis]]<br />Behavior Analysis
−
| style="text-align:center;" |[[file:IVS_WebUI_Icons-Face-Recognition.png|Face Recognition]]<br />Face Recognition
 
 
| style="text-align:center;" |[[file:IVS_WebUI_Icons-Video_Structralization.png|Video Structuralization]]<br />Video Structuralization
 
| style="text-align:center;" |[[file:IVS_WebUI_Icons-Video_Structralization.png|Video Structuralization]]<br />Video Structuralization
 
| style="text-align:center;" |[[file:IVS_WebUI_Icons-Crowd_Map.png|Crowd Map]]<br />Crowd Map
 
| style="text-align:center;" |[[file:IVS_WebUI_Icons-Crowd_Map.png|Crowd Map]]<br />Crowd Map
Line 33: Line 30:
 
==Global IVS==
 
==Global IVS==
 
*[[IVS/Global_Setup|Global IVS Setup Instructions]]
 
*[[IVS/Global_Setup|Global IVS Setup Instructions]]
 +
==Device List==
 +
*[[IVS/Device_List|IVS Device List]]
 +
 
==Names==
 
==Names==
 
{| class="wikitable"
 
{| class="wikitable"
Line 52: Line 52:
 
!|SmartSearch
 
!|SmartSearch
 
|AI
 
|AI
 +
|-
 +
!|Face Capture
 +
|Face Detect
 
|}
 
|}
  
Line 67: Line 70:
 
|Premium IVS
 
|Premium IVS
 
|Tripwire will detect if there is any object crossing the warning line, it can support different direction selection, such as A->B, B->A and bidirectional, and it can activate record , snapshot and alarm according to the judgment result
 
|Tripwire will detect if there is any object crossing the warning line, it can support different direction selection, such as A->B, B->A and bidirectional, and it can activate record , snapshot and alarm according to the judgment result
−
|[https://dahuawiki.com/IVS:Tripwire <ul class="fa-ul">  <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>]
+
|[https://dahuawiki.com/Tripwire <ul class="fa-ul">  <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>]
 
|[https://dahuawiki.com/Playback/SmartSearch/IVS <ul class="fa-ul">  <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>]
 
|[https://dahuawiki.com/Playback/SmartSearch/IVS <ul class="fa-ul">  <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>]
 
|-
 
|-
Line 85: Line 88:
 
|-
 
|-
 
!|Scene Change
 
!|Scene Change
−
|[[file:IVSIconSceneChange.png|65px|Scene Change]]
+
|[[file:IVSIconSceneChange.png|65px|IVS:Scene_Change]]
 
|Premium IVS
 
|Premium IVS
−
|Scene change function is used to detect abnormality of monitoring scene, such as camera being blocked, moved, intense light change and so on. The intelligence library will make comparison between the original picture and the picture of the camera which has been blocked or moved, and judge if there is similarity; it will generate alarm if there is no matched similarity
+
|Scene change function is used to detect abnormality of monitoring scene, such as camera being blocked, moved, intense light change and so on. The Analytics library will make comparison between the original picture and the picture of the camera which has been blocked or moved, and judge if there is similarity; it will generate alarm if there is no matched similarity
 
|[https://dahuawiki.com/IVS:Scene_Change <ul class="fa-ul">  <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>]
 
|[https://dahuawiki.com/IVS:Scene_Change <ul class="fa-ul">  <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>]
 
|[https://dahuawiki.com/Playback <ul class="fa-ul">  <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>]
 
|[https://dahuawiki.com/Playback <ul class="fa-ul">  <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>]
Line 99: Line 102:
 
|-
 
|-
 
!|Smart Tracking
 
!|Smart Tracking
−
|[[file:Smart_Tracking.jpg|65px|Smart Tracking]]
+
|[[file:Smart_Tracking.jpg|65px|IVS:Smart_Track]]
 
|Premium IVS
 
|Premium IVS
 
|Smart tracking is the linked monitoring between the PTZ camera and other devices, such as Radar and Thermal camera. When the camera detects the target, it sends signals to the PTZ camera for tracking.
 
|Smart tracking is the linked monitoring between the PTZ camera and other devices, such as Radar and Thermal camera. When the camera detects the target, it sends signals to the PTZ camera for tracking.
Line 106: Line 109:
 
|-
 
|-
 
!|Thermal Camera IVS
 
!|Thermal Camera IVS
−
|[[file:Thermal_Camera_IVS.jpg|65px|Thermal Camera IVS]]
+
|[[file:Thermal_Camera_IVS.jpg|65px|IVS:Thermal_IVS]]
 
|Premium IVS
 
|Premium IVS
 
|In some special environment, the Thermal camera can realize some IVS function that the normal cameral can’t, such as the object missing/object abandoned/intrusion/tripwire
 
|In some special environment, the Thermal camera can realize some IVS function that the normal cameral can’t, such as the object missing/object abandoned/intrusion/tripwire
Line 113: Line 116:
 
|-
 
|-
 
!|Face Detection
 
!|Face Detection
−
|[[File:IVSIconFaceRecognition.png|65px|Face Detection]]
+
|[[File:IVSIconFaceRecognition.png|65px|IVS:Face_Detection]]
 
|Advanced IVS
 
|Advanced IVS
 
|Face detection is to detect if there is any human face appearing in the video, and capture the face then send it to the NVR for analysis and processing, it can activate snapshot, record and alarm.
 
|Face detection is to detect if there is any human face appearing in the video, and capture the face then send it to the NVR for analysis and processing, it can activate snapshot, record and alarm.
 
|[https://dahuawiki.com/IVS:Face_Detection <ul class="fa-ul">  <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>]
 
|[https://dahuawiki.com/IVS:Face_Detection <ul class="fa-ul">  <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>]
 
|[https://dahuawiki.com/Playback/SmartSearch/Face_Detection <ul class="fa-ul">  <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>]
 
|[https://dahuawiki.com/Playback/SmartSearch/Face_Detection <ul class="fa-ul">  <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>]
−
|-
 
−
!|Face Recognition
 
−
|[[file:IVSIconFaceRecognition.png|65px|Face Detect]]
 
−
|Analytics+
 
−
|Detecting whether there is one face in the video image, and extracting a small size of the face, then send to the back-end for analysis, it can link to the fast capture, record and push alarm.
 
−
|[https://dahuawiki.com/IVS:Face_Recognition <ul class="fa-ul">  <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>]
 
−
|[https://dahuawiki.com/Playback/SmartSearch/Face_Recognition <ul class="fa-ul">  <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>]
 
 
|-
 
|-
 
!|People Counting
 
!|People Counting
−
|[[file:IVSIconPeopleCounting.png|65px|People Counting]]
+
|[[file:IVSIconPeopleCounting.png|65px|IVS:People_Counting]]
 
|Advanced IVS
 
|Advanced IVS
 
|Provides people counting, region people counting, linkage alarm, and statement generation functions.  
 
|Provides people counting, region people counting, linkage alarm, and statement generation functions.  
Line 134: Line 130:
 
|-
 
|-
 
!|Perimeter
 
!|Perimeter
−
|[[File:Perimeter_Protection_Icon.jpg|65px|Perimeter]]
+
|[[File:Perimeter_Protection_Icon.jpg|65px|IVS:Perimeter]]
 
|Analytics+
 
|Analytics+
−
|Dahua Perimeter Protection technology can recognize human and vehicle accurately. In restricted area (such as pedestrian area and vehicle area), the false alarms of intelligent detection based on target type (such as tripwire, intrusion) are largely reduced.
+
|Dahua Perimeter Protection technology can recognize human and vehicle accurately. In restricted area (such as pedestrian area and vehicle area), the false alarms of Analytics detection based on target type (such as tripwire, intrusion) are largely reduced.
 
|[https://dahuawiki.com/IVS:Perimeter <ul class="fa-ul">  <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>]
 
|[https://dahuawiki.com/IVS:Perimeter <ul class="fa-ul">  <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>]
 
|[https://dahuawiki.com/Playback <ul class="fa-ul">  <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>]
 
|[https://dahuawiki.com/Playback <ul class="fa-ul">  <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>]
 
|-
 
|-
 
!|Heat-map
 
!|Heat-map
−
|[[file:IVSIconHeatMap.png|65px|Heatmap]]
+
|[[file:IVSIconHeatMap.png|65px|IVS:Heatmap]]
 
|Advanced IVS
 
|Advanced IVS
 
|It is used to detect the level of motion of moving objects in a certain time. Supports the statistics of the cumulative population density within the set time range, and displays in space with different colors.
 
|It is used to detect the level of motion of moving objects in a certain time. Supports the statistics of the cumulative population density within the set time range, and displays in space with different colors.
Line 148: Line 144:
 
|-
 
|-
 
!|LPC & LPR
 
!|LPC & LPR
−
|[[File:Traffic_Enforcement.jpg|65px|Traffic Enforcement]]
+
|[[File:Traffic_Enforcement.jpg|65px|IVS:Traffic]]
 
|Premium IVS
 
|Premium IVS
 
|Analysis the traffic situation according to the traffic flow
 
|Analysis the traffic situation according to the traffic flow
−
|[https://dahuawiki.com/IVS:Traffic_Enforcement <ul class="fa-ul">  <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>]
+
|[https://dahuawiki.com/IVS:Traffic <ul class="fa-ul">  <li><i class="fas fa-file fa-3x" style="color:darkred;></i></li></ul>]
 
|[https://dahuawiki.com/Playback <ul class="fa-ul">  <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>]
 
|[https://dahuawiki.com/Playback <ul class="fa-ul">  <li><i class="fas fa-play fa-2x" style="color:darkred;></i></li></ul>]
 
|}
 
|}

Latest revision as of 20:54, 7 July 2023

IVS - Intelligent Video System

About

The Face Capture, Perimeter Protection, and IVS functions cannot be used at the same time, only one Analytics+ or IVS function can be used at a time. In addition, the Smart H.265+ and the Smart H.264+ cannot be used simultaneously with either an Analytics+ or an IVS feature.

  • After smart codec is enabled, the device would stop supporting the third bit stream, ROI, and smart event detection, and the actual interface shall prevail.

Setup Suggestions

Analytics Plus Infograph Edit.png
  • The target should be less than 10% of the image.
  • The target size in the image should not be less than 50×50 pixels.
  • Brightness difference between the target and the background should not be less than 10 greyscale.
  • The target should be continuously present in the image for no less than two seconds, and Event 134 the moving distance of the target should be larger than its width and no less than 15 pixels (CIF image).
  • Reduce the complexity of surveillance scene as possible as you can. Analytics analysis function is not recommended to be used in scene with dense targets and frequent illumination change.
  • Avoid areas such as glass, reflective ground, water surface, and areas interfered by branch, shadow and mosquito. Avoid backlight scene and direct light.

Smart Plan

Face Detection
Face Detection 		Heat Map
Heat Map 		IVS
IVS 		People Counting
People Counting 		Stereo Vision
Stereo Vision 		Stereoscopic Behavior Analysis
Behavior Analysis 		Video Structuralization
Video Structuralization 		Crowd Map
Crowd Map 		ANPR
ANPR

Global IVS

Device List

Names

Name Also Known As
Video Structuralization Video Metadata Facial Attributes (DNA)
Smart Tracking Alarm Track
Image Attribute Extraction Human Body attributes Non-Motor Vehicle attributes Vehicle attributes
SmartSearch AI
Face Capture Face Detect

Instructions

Name Icon Type Description Setup Playback
Tripwire Tripwire Premium IVS Tripwire will detect if there is any object crossing the warning line, it can support different direction selection, such as A->B, B->A and bidirectional, and it can activate record , snapshot and alarm according to the judgment result
Intrusion Intrusion Premium IVS Intrusion is used to detect that some sensitive areas can’t be casually entered, exited or crossed in the monitoring scenario, it will trigger device alarm if the target object touches the detection line.
Abandoned/Missing Object Abandoned/Missing Premium IVS Abandoned/missing function is used to detect if there are people, vehicle and objects abandoned or missing in some areas in the monitoring scene; it can trigger an alarm when the target object stays or is missing for a time which exceeds the desired time.
Scene Change IVS:Scene_Change Premium IVS Scene change function is used to detect abnormality of monitoring scene, such as camera being blocked, moved, intense light change and so on. The Analytics library will make comparison between the original picture and the picture of the camera which has been blocked or moved, and judge if there is similarity; it will generate alarm if there is no matched similarity
Auto Tracking Auto Track Advanced IVS PTZ tracking is an innovative feature that transforms manually controlled PTZ cameras into automated tracking systems that keep an moving object in focus and centered in the frame. It follows the object where stationary cameras would lose the object once out of the fixed cameras field of view.
Smart Tracking IVS:Smart_Track Premium IVS Smart tracking is the linked monitoring between the PTZ camera and other devices, such as Radar and Thermal camera. When the camera detects the target, it sends signals to the PTZ camera for tracking.
Thermal Camera IVS IVS:Thermal_IVS Premium IVS In some special environment, the Thermal camera can realize some IVS function that the normal cameral can’t, such as the object missing/object abandoned/intrusion/tripwire
Face Detection IVS:Face_Detection Advanced IVS Face detection is to detect if there is any human face appearing in the video, and capture the face then send it to the NVR for analysis and processing, it can activate snapshot, record and alarm.
People Counting IVS:People_Counting Advanced IVS Provides people counting, region people counting, linkage alarm, and statement generation functions.
Perimeter IVS:Perimeter Analytics+ Dahua Perimeter Protection technology can recognize human and vehicle accurately. In restricted area (such as pedestrian area and vehicle area), the false alarms of Analytics detection based on target type (such as tripwire, intrusion) are largely reduced.
Heat-map IVS:Heatmap Advanced IVS It is used to detect the level of motion of moving objects in a certain time. Supports the statistics of the cumulative population density within the set time range, and displays in space with different colors.
LPC & LPR IVS:Traffic Premium IVS Analysis the traffic situation according to the traffic flow
Retrieved from "https://DahuaWiki.com/index.php?title=IVS&oldid=82509"