Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Thermal/Temperature Monitoring/Stand Alone Camera Setup"
Line 17: | Line 17: | ||
==Step by Step Instructions== | ==Step by Step Instructions== | ||
− | + | ===Camera Initialization=== | |
+ | ''Initialize the Camera over the network using a local computer'' | ||
+ | * Plug the Thermal camera into the LAN | ||
+ | * Connect the NVR to a router/switch on LAN | ||
+ | * Connect computer to router/switch on LAN | ||
− | + | [[File:Temperature_Monitoring_Stand_Alone_Camera_Diagram.png|450px]] |
Revision as of 21:42, 28 April 2020
Temperature Monitoring Solution Stand Alone Camera Setup
This guide will cover the initial camera setup and Blackbody Configuration for the Thermal Temperature Monitoring Solution for a camera connected to LAN.
If you're using a camera connected to the NVR, follow the steps to set up Thermal Monitoring solution with NVR
Prerequisites
- DH-TPC-BF3221-T or DH-TPC-BF5421-T Thermal Hybrid Network Camera
- JQ-D70Z Blackbody
- Temperature Monitoring Physical Setup guide followed
- Thermal camera updated to latest firmware - How To Update TPC-BF5421-T Firmware
Video Instructions
Step by Step Instructions
Camera Initialization
Initialize the Camera over the network using a local computer
- Plug the Thermal camera into the LAN
- Connect the NVR to a router/switch on LAN
- Connect computer to router/switch on LAN