Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Thermal/Temperature Monitoring/NVR Setup"
(→Camera Configuration) |
|||
| Line 91: | Line 91: | ||
For ex: http://192.168.1.108/webplugin.exe | For ex: http://192.168.1.108/webplugin.exe | ||
| + | |||
| + | {{Template:Webplugin}} | ||
Revision as of 19:24, 28 April 2020
Contents
Temperature Monitoring Solution Camera & NVR Setup
This guide will cover the initial NVR, camera,and Blackbody setup and Configuration for the Thermal Temperature Monitoring Solution
If you're using a stand alone Thermal Camera (not plugged directly into NVR), follow the steps to set up Thermal Monitoring solution with stand alone Thermal camera
Description
This guide will cover the initial NVR, thermal camera, and Blackbody setup Configuration for the Thermal Temperature Monitoring Solution
Prerequisites
- DH-TPC-BF3221-T or DH-TPC-BF5421-T Thermal Hybrid Network Camera
- Thermal camera updated to latest firmware - How To Update TPC-BF5421-T Firmware
- JQ-D70Z Blackbody
- Temperature Monitoring Physical Setup
- Initial NVR Setup guide followed
Video Instructions
NVR Initial Setup and Firmware Upgrade:
Complete Setup of NVR and Camera, including Record Setup and Camera configuration:
Step by Step Instructions
NVR Initialization
From a local computer
1. Enter the IP address of the NVR (default http://192.168.1.108) in Internet Explorer
Record Schedule Setup
Camera Configuration
Add /webplugin.exe
