Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Thermal/Temperature Monitoring/NVR Setup"
(→NVR Initialization) |
(→Step by Step Instructions) |
||
| Line 29: | Line 29: | ||
==Step by Step Instructions== | ==Step by Step Instructions== | ||
===NVR Initialization=== | ===NVR Initialization=== | ||
| − | + | ''Initialize the NVR over the network using a local computer'' | |
1. Enter the IP address of the NVR (default http://192.168.1.108) in Internet Explorer | 1. Enter the IP address of the NVR (default http://192.168.1.108) in Internet Explorer | ||
| Line 82: | Line 82: | ||
===Record Schedule Setup=== | ===Record Schedule Setup=== | ||
| + | ''Setup Recording for the Thermal Camera'' | ||
[[File:Temperature_Monitoring_-_NVR_Setup_-_10-1.jpg|650px]] | [[File:Temperature_Monitoring_-_NVR_Setup_-_10-1.jpg|650px]] | ||
| Line 110: | Line 111: | ||
===Camera Configuration=== | ===Camera Configuration=== | ||
| + | ''Configure the settings of the Thermal Camera to setup the Temperature Monitoring Solution'' | ||
[[File:Temperature_Monitoring_-_NVR_Setup_-_22.jpg|650px]] | [[File:Temperature_Monitoring_-_NVR_Setup_-_22.jpg|650px]] | ||
Revision as of 20:45, 28 April 2020
Contents
Temperature Monitoring Solution Camera & NVR Setup
This guide will cover the initial NVR, camera,and Blackbody setup and Configuration for the Thermal Temperature Monitoring Solution
If you're using a stand alone Thermal Camera (not plugged directly into NVR), follow the steps to set up Thermal Monitoring solution with stand alone Thermal camera
Description
This guide will cover the initial NVR, thermal camera, and Blackbody setup Configuration for the Thermal Temperature Monitoring Solution
Prerequisites
- DH-TPC-BF3221-T or DH-TPC-BF5421-T Thermal Hybrid Network Camera
- Thermal camera updated to latest firmware - How To Update TPC-BF5421-T Firmware
- JQ-D70Z Blackbody
- Temperature Monitoring Physical Setup
- Initial NVR Setup guide followed
Video Instructions
NVR Initial Setup and Firmware Upgrade:
Complete Setup of NVR and Camera, including Record Setup and Camera configuration:
Step by Step Instructions
NVR Initialization
Initialize the NVR over the network using a local computer
1. Enter the IP address of the NVR (default http://192.168.1.108) in Internet Explorer
Proceed with Device Initialization
Select
- Region
- Language
- Video Standard
- Temperature Unit
Click Next
Scroll down to review the terms and check the box to agree
Click Next
Set the Time Zone and System Time
Create a password for the NVR and enter twice to Confirm
Click Next
Check the box to enable the Password Protection/Reset options for Email Address and Security Question
Click OK to proceed
A prompt will confirm a successful initialization
You can now log into the NVR's webUI to proceed with setup and configuration
Record Schedule Setup
Setup Recording for the Thermal Camera
Camera Configuration
Configure the settings of the Thermal Camera to setup the Temperature Monitoring Solution
Add /webplugin.exe
