Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Difference between revisions of "Access Control/How to Add Access Controller to SmartPSSAC"

Line 7: Line 7:
 
==Pre-requisites==
 
==Pre-requisites==
 
Having an initialized Access Controller on the local network ready to go. Please Follow these instructions if not already done so: <br>
 
Having an initialized Access Controller on the local network ready to go. Please Follow these instructions if not already done so: <br>
 +
*[[Access_Control/How_to_Initialize_DHI_ASC2204C-S_with_Configtool|How to initialize DHI-ASC2204C-S with Configtool]]
 
*[[Access_Control/How_to_Change_IP_Address_to_DHI-ASC2204C-S|How to change IP Address to DHI-ASC2204C-S]]
 
*[[Access_Control/How_to_Change_IP_Address_to_DHI-ASC2204C-S|How to change IP Address to DHI-ASC2204C-S]]
*[[Access_Control/How_to_Factory_Reset_DH-ASC2204C-S|How to Factory Reset DH-ASC2204C-S]]
 
 
*[[Access_Control/How_to_Change_Time_and_Date_DH-ASC2204C-S|How to change the time and date of DH-ASC2204C-S]]
 
*[[Access_Control/How_to_Change_Time_and_Date_DH-ASC2204C-S|How to change the time and date of DH-ASC2204C-S]]
  
 
==Step by Step Instructions==
 
==Step by Step Instructions==
 
1.
 
1.

Revision as of 17:01, 3 December 2021

Description

This article will show the steps on how to add an Access Controller to SMARTPSS-AC and change the Door Names easily identify the doors as we go through the configurations.

Important

  • Access Controller must be on latest firmware or it may continuously go offline. Please check the firmware version of your controller before continuing through the instructions.

Pre-requisites

Having an initialized Access Controller on the local network ready to go. Please Follow these instructions if not already done so:

Step by Step Instructions

1.