Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Thermal/Temperature Monitoring/Stand Alone Camera Setup"
(→Prerequisites) |
|||
| Line 5: | Line 5: | ||
This guide will cover the initial camera setup and Blackbody Configuration for the [[Thermal/Temperature Monitoring|Thermal Temperature Monitoring Solution]] | This guide will cover the initial camera setup and Blackbody Configuration for the [[Thermal/Temperature Monitoring|Thermal Temperature Monitoring Solution]] | ||
| − | If you're using | + | If you're using a camera connected to the NVR, follow the [[Thermal/Temperature Monitoring/NVR Setup|steps to set up Thermal Monitoring solution with NVR]] |
Revision as of 23:55, 23 April 2020
Temperature Monitoring Solution Stand Alone Camera Setup
This guide will cover the initial camera setup and Blackbody Configuration for the Thermal Temperature Monitoring Solution
If you're using a camera connected to the NVR, follow the steps to set up Thermal Monitoring solution with NVR
Description
This guide will cover the initial camera setup and Blackbody Configuration for the Thermal Temperature Monitoring Solution
Prerequisites
- DH-TPC-BF3221-T or DH-TPC-BF5421-T Thermal Hybrid Network Camera
- JQ-D70Z Blackbody
- Temperature Monitoring Physical Setup guide followed
- Thermal camera updated to latest firmware - How To Update TPC-BF5421-T Firmware
Diagrams
Video Instructions
Step by Step Instructions
The camera should be upgraded to the correct firmware and initialized before setup. Please follow How To Update TPC-BF5421-T Firmware before attempting this guide
1.
