Revision as of 23:00, 20 May 2020

Temperature Monitoring Solution Camera & NVR Setup

This guide will cover the initial NVR, camera,and Blackbody setup and Configuration for the Thermal Temperature Monitoring Solution

If you're using a stand alone Thermal Camera (not plugged directly into NVR), follow the steps to set up Thermal Monitoring solution with stand alone Thermal camera

Description

This guide will cover the initial NVR, thermal camera, and Blackbody setup Configuration for the Thermal Temperature Monitoring Solution

Prerequisites

• DH-TPC-BF3221-T or DH-TPC-BF5421-T Thermal Hybrid Network Camera
• Thermal camera updated to latest firmware - How To Update TPC-BF5421-T Firmware
• JQ-D70Z Blackbody
• Temperature Monitoring Physical Setup
• Initial NVR Setup guide followed

Video Instructions

NVR Initial Setup and Firmware Upgrade:

Total Setup of Thermal Solution through NVR with Camera, including Record Setup and configuration at webUI:

Step by Step Instructions

NVR Initialization

Initialize the NVR over the network using a local computer

• Plug the Thermal camera into the PoE port on the back of the NVR
• Connect the NVR to a router/switch
• Connect computer to router/switch

1. Enter the IP address of the NVR (default http://192.168.1.108) in Internet Explorer

Proceed with Device Initialization

Select

• Region
• Language
• Video Standard
• Temperature Unit

Click Next

Scroll down to review the terms and check the box to agree

Click Next

Set the Time Zone and System Time

Create a password for the NVR and enter twice to Confirm

Click Next

Check the box to enable the Password Protection/Reset options for Email Address and Security Question

Click OK to proceed

A prompt will confirm a successful initialization

You can now log into the NVR's webUI to proceed with setup and configuration

Record Schedule Setup

Setup Video and Snapshot Recording for the Thermal Camera

From the Main Menu click Management > Camera

Under Registration

The thermal camera will appear in the Channel list as two channels, one for the visual channel and one for the thermal channel, in this example are Channels 1 and 2

Click Management > Storage

Click Schedule

Click Setting to adjust the Record schedule (when the camera will record) for the thermal camera channel

Use the interface to select the days and enter a Time Period. Select the Record type you wish to record for the camera: Alarm and IVS must be enable for the Temperature Alarm to record.

Click OK

The schedule will be updated

Click Copy

Select the other channel of the Thermal Camera (in this example Channel 2)

Click OK

Click the Snapshot tab

Configure the Snapshot schedule record settings the same way s the previous steps

Click OK to save

Click Storage > Record

Thermal Configuration

Configure the settings of the Thermal Camera to setup the Temperature Monitoring Solution

1. From the Main Menu of the webUI select AI