Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Thermal/Temperature Monitoring/NVR Setup
Contents
Temperature Monitoring Solution Camera & NVR Setup
This guide will cover the initial NVR, camera,and Blackbody setup and Configuration for the Thermal Temperature Monitoring Solution
If you're using a stand alone Thermal Camera (not plugged directly into NVR), follow the steps to set up Thermal Monitoring solution with stand alone Thermal camera
Description
This guide will cover the initial NVR, thermal camera, and Blackbody setup Configuration for the Thermal Temperature Monitoring Solution
Prerequisites
- DH-TPC-BF3221-T or DH-TPC-BF5421-T Thermal Hybrid Network Camera
- Thermal camera updated to latest firmware - How To Update TPC-BF5421-T Firmware
- JQ-D70Z Blackbody
- Temperature Monitoring Physical Setup
- Initial NVR Setup guide followed
Video Instructions
NVR Initial Setup and Firmware Upgrade:
Complete Setup of NVR and Camera, including Record Setup and Camera configuration:
Step by Step Instructions
NVR Initialization
Initialize the NVR over the network using a local computer
- Plug the Thermal camera into the PoE port on the back of the NVR
- Connect the NVR to a router/switch
- Connect computer to router/switch
1. Enter the IP address of the NVR (default http://192.168.1.108) in Internet Explorer
Proceed with Device Initialization
Select
- Region
- Language
- Video Standard
- Temperature Unit
Click Next
Scroll down to review the terms and check the box to agree
Click Next
Set the Time Zone and System Time
Create a password for the NVR and enter twice to Confirm
Click Next
Check the box to enable the Password Protection/Reset options for Email Address and Security Question
Click OK to proceed
A prompt will confirm a successful initialization
You can now log into the NVR's webUI to proceed with setup and configuration
Record Schedule Setup
Setup Video and Snapshot Recording for the Thermal Camera
From the Main Menu click Management > Camera
Under Registration
The thermal camera will appear in the Channel list as two channels, one for the visual channel and one for the thermal channel, in this example are Channels 1 and 2
Click Management > Storage
Click Schedule
Click Setting to adjust the Record schedule (when the camera will record) for the thermal camera channel
Use the interface to select the days and enter a Time Period. Select the Record type you wish to record for the camera: Alarm and IVS must be enable for the Temperature Alarm to record.
Click OK
The schedule will be updated
Click Copy
Select the other channel of the Thermal Camera (in this example Channel 2)
Click OK
Click the Snapshot tab
Configure the Snapshot schedule record settings the same way s the previous steps
Click OK to save
Click Storage > Record
Camera Configuration
Configure the settings of the Thermal Camera to setup the Temperature Monitoring Solution
To log into the camera's web interface from the NVR, click Management > Camera
Find the thermal camera in the channel list and click the icon under Web Browser
A new window will open to conenct to the camera's webUI
Follow the prompts on screen to install the plug in, or manually download the plugin using the following link:
Add /webplugin.exe