Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Access Control/How to Add Users With Pins Cards and Fingerprints to DSS Express V8
Contents
Description
This article will go over adding users with all three methods of authentication for doors on DSS Express V8.
- How to add a user: Adding users through the "Person and Vehicle Info" tab will allow you to open doors via the three authentication methods (Pins, Cards, Fingerprints)
- How to assign PINs to Users: PINs can be assigned to each user to be able to open a door. PINs need to be at least a 6 digit number.
- How to assign Cards to Users: Cards can be assigned via Dahua Card Reader or using Dahua Card Enrollment Reader (ASM100)
- How to assign Fingerprints to Users: Fingerprints can be assigned to users via Dahua Fingerprints Reader or Dahua Fingerprint Enrollment Reader (ASM202)
Prerequisites
Step by Step Instructions
How to Add a User
1.
2.
3.
How to assign PINs to Users
1.
2.
How to assign Cards to Users
1.
2.
3.
4.
5.
How to assign Fingerprints to Users
1.
2.
3.
4.
5.
6.
7.
8.
