USA/IPCamera/PTZ/Pro/52C430UNI

Revision as of 16:59, 13 March 2020 by Edward (talk | contribs)

52C430UNI

52C430UNI
Specifications Quick Start Guide Manual Firmware PTZ Firmware

Build Date: 07-06-2021

Build Date: 03-03-2020
SD52C230T HN.jpg


Features

  • 1/3-in. 4 MP Progressive Scan CMOS
  • Powerful 30x Optical Zoom
  • H.265 and H.264 Video Compression Encoding
  • 4 MP / 3 MP @ 30 fps and 1080p @ 30/60 fps
  • True Wide Dynamic Range
  • Auto-tracking and Intelligent Video System (IVS)
  • IK10 Vandal Resistance
  • PoE+ Support

CAD Images

  • 52C copy.jpg

Compression

Intelligent Features

  • Error creating thumbnail: Unable to save thumbnail to destination

    Abandoned/Missing

  • Error creating thumbnail: Unable to save thumbnail to destination

    Tripwire

  • Error creating thumbnail: Unable to save thumbnail to destination

    Intrusion

  • Error creating thumbnail: Unable to save thumbnail to destination

    Auto Track

FOV

  • Camera Height: 10m
    Focal Length: 4.5mm
    Target Horizontal Dist: 80.2m

  • Camera Height: 10m
    Focal Length: 135mm
    Target Horizontal Dist: 2424.5m

Hardware Reset Instructions

In order to access the hardware reset button on the camera you must remove the outer casing and shell.

Remove the three (3) screws in the outer casing

Error creating thumbnail: Unable to save thumbnail to destination

Remove the four (4) screws in the dome covering

Error creating thumbnail: Unable to save thumbnail to destination

Remove the shell covering the camera

Error creating thumbnail: Unable to save thumbnail to destination

The hardware reset button is circled

Error creating thumbnail: Unable to save thumbnail to destination


Press and hold the reset button down for 30 seconds with the camera powered on.

After releasing the button the camera should be reset.

Specifications

Retrieved from "https://DahuaWiki.com/index.php?title=USA/IPCamera/PTZ/Pro/52C430UNI&oldid=59816"