Difference between revisions of "3rd Party VMS/Control4/Add Dahua Recorder to Control4"

From Dahua Wiki

Jump to: navigation, search
 
Line 21: Line 21:
 
Download the Dahua drivers:
 
Download the Dahua drivers:
  
*[https://dahuawiki.com/images/Firmware/Control4/3rd_Party_Driver/dahua_camera_nvr_fixed.c4z Control4 Driver for Dahua IP Cameras]
+
*[https://dahuawiki.com/images/Files/Third_Party/Control4/Dahua_Driver/dahua_camera_nvr_fixed.c4z Control4 Driver for Dahua IP Cameras]
 +
 
 +
*[https://dahuawiki.com/images/Files/Third_Party/Control4/Dahua_Driver/DH_nvr_cableproxy.c4z Control4 Driver for Dahua Recorders]
  
*[https://dahuawiki.com/images/Firmware/Control4/Dahua_Driver/DH_nvr_cableproxy.c4z Control4 Driver for Dahua Recorders]
 
  
 
Copy/paste or drag the files into the directory C:\Users\User\Documents\Control4\Drivers
 
Copy/paste or drag the files into the directory C:\Users\User\Documents\Control4\Drivers

Latest revision as of 20:52, 31 July 2020

How to Add Dahua Recorder to Control4

Description

This guide will cover how to add a supported Dahua Recorder to the Control4 System.

A specialized driver allows a Control4 dealer to add an Security icon in the watch menu. This will enable the Control4 System to use the Monitor-Out/HDMI/VGA connector to integrate Dahua devices.

Prerequisites

Instructions for installing Dahua drivers on Control4 Composer

After installing Composer, navigate to the default directory that contains the drivers:

C:\Users\User\Documents\Control4\Drivers

Download the Dahua drivers:


Copy/paste or drag the files into the directory C:\Users\User\Documents\Control4\Drivers


Add Dahua Driver to Control4 Composer.jpg


Dahua Firmware to Enable Control4 Integration

Model Firmware
X72A2A
X51A3E
X52A3A
X52A3N
X51A1E
X51A2E
X72A3A
X54A5L
X58A5S

Video Instructions

Coming Soon

Step by Step Instructions

1. Make sure the Recorder has been updated to the correct supported firmware:

The full list of supported firmware can be found at 3rd Party VMS/Control4

Firmware version used for this guide: V3.216.10BE000.0Build Date:2019-04-18

Also make sure the recorder is factory defaulted before beginning setup by going into Setup>System>Default>Factory Reset

recorder default.jpg

1.b. Make sure the monitor has been connected to the same local network as the devices. For wifi setup:


2. Open Control4 Composer. If this is the first time loading the program, you will be prompted to enter your Control4 account credentials:

Control 4 Setup 1.jpg


3. After logging in a prompt will appear. Select the type of connection the computer has to the Control4 Controller. Make sure the controller is powered on and connected to the network. In this case the computer is on the same network as the EA1 Controller, so Local System is selected


Control 4 Setup 2.jpg


4. The software will scan the local network and give a prompt with any discovered devices. Select the controller then click Connect


Control 4 Setup 4.jpg


5.To begin adding devices, select the 'Discovered' tab in the System Design interface to pull up devices on the local network that have been automatically detected by the software


Control 4 Setup 4.5.jpg


6. Begin by adding the Control4 devices on the network, such as the C4-EA1 Controller and Wireless Monitor. You can double click the item in the list to add or Right Click>Add to Project

Control 4 Setup 6.5.jpg


7. Added devices will auto populate the device tree on the left side of the screen

Control 4 Setup 6.6.jpg


8. On the right side of the screen click the Search tab, then enter 'dh' and press Enter.

Double Click NVR Viewer in the list

Control4 Add Recorder x8.jpg


9. The recorder will be added to the device tree on the left. Enter the NVR settings in the center of the page, such as local IP and username/password, and # of Channels should be the number of video streams added to the recorder.

control4 recorder 2.jpg


10. After entering each field, click Set next to each field to save each setting


control4 recorder 3.jpg


The NVR setup is complete, now the video streams must be defined through the Composer software

11. To integrate the video streams from the IP cameras added to the recorder, click on the Search tab in the top right of the page, then enter "dahua" to filter the device types and press Enter

control4 recorder 6.jpg

12. Right click the search result that is listed as 'Dahua NVR Fixed Camera' and select 'Add to Project' OR double click the Dahua NVR Fixed Camera - repeat this process for as many cameras you wish to connect form the NVR.

Once added the camera will be lsited in the device tree as "Fixed Camera". You can click to highlight the device then press F2 to enter a new name for the camera

Control4 Add Recorder x1.jpg

13. Select Connections on the left. Then select the NVR in the device tree.


Control4 Add Recorder x2.jpg


14. To associate the IPC from the NVR to this channel, drag and drop 'NVR_Link from the top window to one of the already created devices that appear in the bottom window.


Control4 Add Recorder x2.1.jpg


15. The sub stream must be adjusted

Go to System Design on the left Select the camera form the device tree

Under Advanced Properties change the H264 Video Stream value to 1 then click Set


Control4 Add Recorder x3.jpg


16. To update the project to other Control4 devices, in Composer go to File>Refresh Navigators

Control4 Add Recorder x4.jpg


Note - Setting Stream Type

It is necessary to configure the Control4 interface to pull the substream video from the Dahua device rather than the main stream. Pulling the main stream can cause delays in streaming video which can result in slow video streaming on the Control4 Panel.

Under the Advanced Properties of the selected device:

Control 4 How To Use Sub Stream NVR 1.jpg

Change H264 or MJPEG Video Stream to 1

Control 4 How To Use Sub Stream NVR 2.jpg

Click Set to save the setting

Control 4 How To Use Sub Stream NVR 3.jpg