Difference between revisions of "Access Control/How to Add Access Controller to SmartPSSAC"

(Created page with "==Description== This article will show the steps on how to add an Access Controller to SMARTPSS-AC and change the Door Names easily identify the doors as we go through the con...")
 
Line 10: Line 10:
 
*[[Access_Control/How_to_Factory_Reset_DH-ASC2204C-S|How to Factory Reset DH-ASC2204C-S]]
 
*[[Access_Control/How_to_Factory_Reset_DH-ASC2204C-S|How to Factory Reset DH-ASC2204C-S]]
 
*[[Access_Control/How_to_Change_Time_and_Date_DH-ASC2204C-S|How to change the time and date of DH-ASC2204C-S]]
 
*[[Access_Control/How_to_Change_Time_and_Date_DH-ASC2204C-S|How to change the time and date of DH-ASC2204C-S]]
 +
 +
==Step by Step Instructions==
 +
1.

Revision as of 22:12, 2 December 2021

Description

This article will show the steps on how to add an Access Controller to SMARTPSS-AC and change the Door Names easily identify the doors as we go through the configurations.

Important

  • Access Controller must be on latest firmware or it may continuously go offline. Please check the firmware version of your controller before continuing through the instructions.

Pre-requisites

Having an initialized Access Controller on the local network ready to go. Please Follow these instructions if not already done so:

Step by Step Instructions

1.