-
...t, and the people’s movement in the room won’t. The default setting is monitor the motion of the whole screen. And you can set the motion sensitivity of t
9 KB (1,386 words) - 22:27, 14 October 2020
-
1. Connect the device to the monitor and then connect a mouse.
...rname''': 666666. '''Password''': 666666(Lower authority user who can only monitor, playback, backup and etc.)
6 KB (898 words) - 22:41, 30 July 2021
-
2. Monitor that connected to Dahua Recorder
11 KB (1,725 words) - 19:31, 2 August 2019
-
===The displayed video is not full in the monitor.===
1. Check your physical connections from the system to the monitor.
1 KB (213 words) - 17:53, 17 August 2016
-
* If Check if monitor is on the correct source setting then set to the correct source.
* If DVR / NVR is set to a resolution that is unsupported by monitor then reset resolution.
546 bytes (93 words) - 04:16, 17 August 2016
-
* The network bandwidth is not sufficient. The multiple-channel monitor operation needs at least 100M or higher.
* Your PC resources are not sufficient. For 16-ch remote monitor operation, the PC shall have the following environment: Quad Core, 2G or hi
2 KB (275 words) - 19:05, 17 August 2016
-
*If DVR and monitor resistance is not compatible then use a different monitor/DVR.
920 bytes (151 words) - 19:19, 17 August 2016
-
|Current user has no right to monitor.
!rowspan="2"|The displayed video is not full in the monitor.
10 KB (1,564 words) - 20:39, 7 December 2022
-
...under main stream config, monitor video or not. Generally for storage and monitor.
Streaming media protocol connection, under sub stream 1 config, monitor video or not. When network bandwidth is insufficient, it substitutes main s
5 KB (733 words) - 22:57, 11 August 2016
-
It is to adjust monitor window brightness. You can adjust this value if the video is too dark or to
It is to adjust monitor window contrast. The larger the number, the higher the contrast is. You can
9 KB (1,540 words) - 18:07, 12 December 2017
-
...stream function in your camera and set the resolution as CIF. Then you can monitor via the Blackberry cell phone.
3 KB (454 words) - 23:02, 11 August 2016
-
* Here you can privacy mask the specified video in the monitor video.
2 KB (277 words) - 00:05, 29 June 2016
-
* The default monitor image path is C:\Documents and Settings\Admin\WebDownload\Snapshot.
* The default monitor record path is C:\Documents and Settings\Admin\WebDownload\LiveRecord.
836 bytes (122 words) - 23:20, 11 August 2016
-
* Open preview, streaming media protocol, select multicast, and monitor via multicast format.
1 KB (163 words) - 22:44, 11 August 2016
-
Real-time monitor
1 KB (215 words) - 18:58, 15 August 2016
-
...en user “default” automatically login. You can set some rights such as monitor for this user so that you can view some channel view without login.
3 KB (444 words) - 23:13, 11 August 2016
-
...d_VTO4202_To_VTH_Via_Configtool|How to setup DHI-VTO4202F-P-S2 with Indoor Monitor via ConfigTool]]
3 KB (362 words) - 17:02, 25 January 2024
-
...een menu of displaying set-up information and/or instructions on a display monitor.
16 KB (2,651 words) - 18:05, 15 August 2016
-
* '''Saturation''': It is to adjust monitor window saturation. The value ranges from 0 to 100. The default value is 50.
* '''Brightness''': It is to adjust monitor window bright. The value ranges from 0 to 100. The default value is 50. The
4 KB (722 words) - 05:06, 15 August 2016
-
When playback, click it to restore real-time monitor mode.
One-window monitor mode, click this button to display assistant function: PTZ control and imag
25 KB (3,410 words) - 19:15, 1 July 2016
