IVS 2.0

Revision as of 16:21, 2 December 2019 by JP (talk | contribs) (Created page with "==IVS - Intelligent Video Surveillance== ==About== The Face Capture, Perimeter Protection, and IVS functions cannot be used at the same time, only one Analytics+ or IVS functi...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

IVS - Intelligent Video Surveillance

About

The Face Capture, Perimeter Protection, and IVS functions cannot be used at the same time, only one Analytics+ or IVS function can be used at a time. In addition, the Smart H.265+ and the Smart H.264+ cannot be used simultaneously with either an Analytics+ or an IVS feature.

  • After smart codec is enabled, the device would stop supporting the third bit stream, ROI, and smart event detection, and the actual interface shall prevail.

Setup Suggestions

  • The target should be less than 10% of the image.
  • The target size in the image should not be less than 50×50 pixels.
  • Brightness difference between the target and the background should not be less than 10 greyscale.
  • The target should be continuously present in the image for no less than two seconds, and Event 134 the moving distance of the target should be larger than its width and no less than 15 pixels (CIF image).
  • Reduce the complexity of surveillance scene as possible as you can. Intelligent analysis function is not recommended to be used in scene with dense targets and frequent illumination change.
  • Avoid areas such as glass, reflective ground, water surface, and areas interfered by branch, shadow and mosquito. Avoid backlight scene and direct light.

Smart Plan

Face Detection
Face Detection
Heat Map
Heat Map
IVS
IVS
People Counting
People Counting
Stereo Vision
Stereo Vision
Stereoscopic Behavior Analysis
Behavior Analysis
Face Recognition
Face Recognition
Video Structuralization
Video Structuralization
Crowd Map
Crowd Map
ANPR
ANPR

Global IVS

IVS Features

Analytics+

IVS
Interface SystemUI (Old) SystemUI (New) WebUI SmartPSS 1.16 SmartPSS 2.0
Perimeter Protection Perimeter Protection SystemUI Setup Internet Explorer Setup NA SmartPSS 2.0 Setup
People Counting (4 Regions) People Counting SystemUI Setup SystemUI Setup Internet Explorer Setup NA SmartPSS 2.00 Setup
Face Attributes Face Attributes Internet Explorer Setup NA NA
Face Recognition Face Recognition SystemUI Setup Internet Explorer Setup NA NA

Advanced IVS

IVS
Interface SystemUI (Old) SystemUI (New) WebUI SmartPSS 1.16 SmartPSS 2.0
Facial Detection Face Detect SystemUI Setup SystemUI Setup Internet Explorer Setup SmartPSS 1.16 Setup SmartPSS 2.00 Setup
People Counting (1 Region) People Counting SystemUI Setup SystemUI Setup Internet Explorer Setup NA SmartPSS 2.00 Setup
Heatmap Heatmap SystemUI Setup SystemUI Setup Internet Explorer Setup SmartPSS 1.16 Setup SmartPSS 2.00 Setup
Auto Track Auto Track SystemUI Setup SystemUI Setup Internet Explorer Setup SmartPSS 1.16 Setup SmartPSS 2.00 Setup

Premium IVS

IVS
Interface SystemUI (Old) SystemUI (New) WebUI SmartPSS 1.16 SmartPSS 2.0
Motion
Scene Change Scene Change SystemUI Setup SystemUI Setup Internet Explorer Setup SmartPSS 1.16 Setup SmartPSS 2.00 Setup
Abandoned/Missing Abandoned/Missing SystemUI Setup SystemUI Setup Internet Explorer Setup SmartPSS 1.16 Setup SmartPSS 2.00 Setup
Tripwire Tripwire SystemUI Setup SystemUI Setup Internet Explorer Setup SmartPSS 1.16 Setup SmartPSS 2.00 Setup
Intrusion Intrusion SystemUI Setup SystemUI Setup Internet Explorer Setup SmartPSS 1.16 Setup SmartPSS 2.00 Setup

{{#related:Navbox_Page_Test}}