Difference between revisions of "Troubleshoot/NVR/"

 
(36 intermediate revisions by 7 users not shown)
Line 1: Line 1:
−
===Video Loss from NVR===
+
==Network==
−
* Disconnect, reconnect power and video cables to NVR.
+
* [[Troubleshoot/NVR/DDNSTroubleshoot | DDNS Troubleshoot]]
−
* Change power supply connected to NVR.
+
* [[Troubleshoot/NVR/P2P_Troubleshoot | P2P Troubleshoot]]
−
* Disconnect HDD and boot NVR. If NVR boots without HDD, then HDD has failed or is not compatible.
+
* [[Troubleshoot/NVR/Browser_Troubleshoot | Unable to Log In from Browser]]
−
* Connect a 1080P display to the NVR. If image is displayed, initial display is not compatible with NVR.
+
* [[Troubleshoot/NVR/Network_Troubleshoot| Network Connection Not Stable]]
−
* If connected via HDMI, ensure that the display is 1080P capable.
+
* [[Troubleshoot/NVR/Choppy_Feed | Video is Choppy When Viewing From PC]]
 +
* [[Troubleshoot/NVR/Expired_Cert | Expired Certificate]]
 +
* [[Troubleshoot/NVR/Failed_to_Open_Video_You_Have_No_Right_To_Operate|Failed to Open Video! You Have No Right To Operate!]]
 +
* [[Troubleshoot/Internet_Explorer/Signature_is_Corrupt_or_Invalid|Internet Explorer Troubleshoot-"Signature is Corrupt or Invalid"]]
  
−
===NVR does not boot===
+
<!--[[Troubleshoot/NVR/How_To_Install_Chrome_Extension|How to Install Chrome Extension]]-->
−
* Disconnect, reconnect power and video cables to NVR.
 
−
* Disconnect HDD and boot NVR. If NVR boots without HDD, then HDD has failed or is not compatible.
 
  
−
===NVR randomly rebooting===
+
==Playback and Recording==
−
* Disconnect HDD and boot NVR. If NVR boots without HDD, then HDD has failed or is not compatible. 
+
* [[Troubleshoot/NVR/No_HDD| No Hard Drive Detected]]
 +
* [[Troubleshoot/NVR/Motion_Record_Troubleshoot| Motion Detection Not Recording Motion]]
 +
* [[Troubleshoot/NVR/Unable_to_Playback| Unable to Playback Recorded Video]]
 +
* [[Troubleshoot/NVR/Unable_To_Disarm_Alarm| Alarm Signal Cannot Be Disarmed]]
 +
* [[Troubleshoot/NVR/Alarm_Null| Alarm Function is Null]]
 +
* [[Troubleshoot/NVR/Need_More_Recording_Space| Record Storage Period is Too Short]]
 +
* [[Troubleshoot/NVR/Display_Troubleshoot | Image is Not Full Screen]]
 +
* [[Troubleshoot/NVR/Errors_Found_In_Log|Errors Found in Log]]
  
−
[[File:RecordSchedule.jpg|thumb|100px|Record Schedule]]
+
==PTZ==
−
===Unable to Playback Recordings===
+
*[[Troubleshoot/NVR/PTZ_Troubleshoot| PTZ Not Responding to Controls]]
−
* Check that HDD is detected by NVR
+
*[[Troubleshoot/NVR/Network_Keyboard_Troubleshoot| Unable to Control PTZ with Network Keyboard]]
−
* "Record Status" is set to, "Enabled" on all channels
+
*[[Troubleshoot/NVR/Motion_Detect_PTZ_Activation| How to link PTZ camera when motion triggered on one of the other camera channel in recorder]]
−
* Check, "Record Schedule" and ensure your desired recording is enabled; [[MotionRecord | Motion]], [[ScheduleRecord | Schedule]], or [[AlarmRecord | Alarm]] Recording.
 
−
* Recorded file has been overwritten
 
  
−
===Video Feed Distorted When Playing Back Video===
+
==Audio==
−
*Video quality is set too low. Check Encoding
+
*[[Troubleshoot/Disable_Audio_Recording| How to disable Audio recording on Dahua NVR or XVR]]
−
*Program read error, bit data is too small. Reboot the NVR.
+
*[[Troubleshoot/NVR/Disable_Audio_Dahua_IPC| How to disable audio on Dahua IP camera that connected to Dahua NVR]]
−
*HDD malfunction. Try formatting the HDD
+
*[[Troubleshoot/NVR/No_Audio_from_Live_Feed| No Audio from Live Feed]]
−
*NVR hardware malfunction. Flash the latest compatible firmware for your system.
+
*[[Troubleshoot/NVR/No_Audio_Playback| No Audio from Playback]]
  
−
===Time and Date is Incorrect===
+
==Video Loss and Image Issues==
−
*Ensure Date and Time are set properly in the NVR. See: [[[[Http://192.168.1.9/index.php/DateTime|Date and Time]]
+
*[[Troubleshoot/NVR/HDMI_Troubleshoot| Video Loss via HDMI]]
 +
*[[Troubleshoot/NVR/Video_Loss_1_Camera| Video Loss from 1 Camera]]
 +
*[[Troubleshoot/NVR/Video_Loss_All_Cameras| Video Loss from Multiple Cameras]]
 +
*[[Troubleshoot/NVR/Troubleshoot_Blurry_Camera| Live Camera Feed is Blurry or Distorted]]
 +
*[[Troubleshoot/NVR/Troubleshoot_Blurry_Camera_Playback| Camera Feed is Blurry or Distorted During Playback]]
  
 +
==Functionality==
 +
*[[Troubleshoot/NVR/Troubleshoot_IR_Remote|How to Set Up and Troubleshoot an IR Remote]]
 +
*[[Troubleshoot/NVR/System_Does_Not_Boot|System Does Not Boot]]
 +
*[[Troubleshoot/NVR/Rebooting_System| System is Rebooting]]
 +
*[[Troubleshoot/NVR/Troubleshoot_Date_and_Time| Time and Date are Incorrect]]
 +
*[[Troubleshoot/NVR/Burn_Error_Troubleshoot|Burn Error / USB Backup Error]]
 +
*[[Troubleshoot/NVR/Change_Camera_Order|How to Change Camera Order of Connected Cameras]]
 +
*[[Troubleshoot/NVR/Change_Camera_Order_Sequence|How to Change Camera Order of Connected Cameras Using Sequence]]
  
 +
==Quick Reference==
  
 +
{| class="wikitable"
 +
!colspan="2"|NVR FAQ
 +
|-
 +
!Problem
 +
!Solution
 +
|-
 +
!rowspan="8"|NVR will not boot.
 +
|Input power is not correct.
 +
|-
 +
|Power connection is not correct.
 +
|-
 +
|Power switch button is damaged.
 +
|-
 +
|Program upgrade is wrong.
 +
|-
 +
|HDD malfunction or something wrong with HDD ribbon.
 +
|-
 +
|Seagate DB35.1, DB35.2，SV35 or Maxtor 17-g has compatibility problem. Please upgrade to the latest version to solve this problem.
 +
|-
 +
|Front panel error.
 +
|-
 +
|Main board is damaged.
 +
|-
 +
!rowspan="6"|NVR often automatically shuts down or stops running.
 +
|Input voltage is not stable or it is too low.
 +
|-
 +
|HDD malfunction or something wrong wit the ribbon.
 +
|-
 +
|Button power is not enough.
 +
|-
 +
|Front video signal is not stable.
 +
|-
 +
|Working environment is too harsh, too much dust.
 +
|-
 +
|Hardware malfunction.
 +
|-
 +
!rowspan="4"|System is unable to detect hard drive.
 +
|HDD is broken.
 +
|-
 +
|HDD ribbon is damaged.
 +
|-
 +
|HDD cable connection is loose.
 +
|-
 +
|Main board SATA port is broken.
 +
|-
 +
!rowspan="5"|Video loss from 1, multiple, or all channels.
 +
|-
 +
|Program is not compatible. Please upgrade to the latest version.
 +
|-
 +
|Brightness is 0. Please restore factory default setup.
 +
|-
 +
|Check your screen saver.
 +
|-
 +
|NVR hardware malfunctions.
 +
|-
 +
!rowspan="6"|I can not search local records.
 +
|-
 +
|HDD ribbon is damaged.
 +
|-
 +
|HDD is broken.
 +
|-
 +
|Upgraded program is not compatible.
 +
|-
 +
|The recorded file has been overwritten.
 +
|-
 +
|Record function has been disabled
 +
|-
 +
!rowspan="6"|Video is distorted when searching local records.
 +
|-
 +
|Video quality setup is too low.
 +
|-
 +
|Program read error, bit data is too small. There is mosaic in the full screen. Please restart the NVR to solve this problem.
 +
|-
 +
|HDD data ribbon error.
 +
|-
 +
|HDD malfunction.
 +
|-
 +
|NVR hardware malfunctions.
 +
|-
 +
!rowspan="4"|Time display is not correct.
 +
|-
 +
|Setup is not correct
 +
|-
 +
|Battery contact is not correct or voltage is too low.
 +
|-
 +
|Crystal is broken.
 +
|-
 +
!rowspan="9"|NVR can not control PTZ
 +
|-
 +
|Front panel PTZ error
 +
|-
 +
|PTZ decoder setup, connection or installation is not correct.
 +
|-
 +
|Cable connection is not correct.
 +
|-
 +
|PTZ setup is not correct.
 +
|-
 +
|PTZ decoder and NVR protocol is not compatible.
 +
|-
 +
|PTZ decoder and NVR address is not compatible.
 +
|-
 +
|When there are several decoders, please add 120 Ohm between the PTZ decoder A/B cables furthest end to delete the reverberation or impedance matching. Otherwise the PTZ control is not stable.
 +
|-
 +
|The distance is too far.
 +
|-
 +
!rowspan="8"|Unable to login to WebGUI
 +
|-
 +
|For Windows 98 or Windows ME user, please update your system to Windows 2000 sp4. Or you can install client-end software of lower version. Please note right now, our NVR is not compatible with Windows VISTA control.
 +
|-
 +
|ActiveX control has been disabled.
 +
|-
 +
|No dx8.1 or higher. Please upgrade display card driver.
 +
|-
 +
|Network connection error.
 +
|-
 +
|Network setup error.
 +
|-
 +
|Password or user name is invalid.
 +
|-
 +
|Client-end is not compatible with NVR program.
 +
|-
 +
!rowspan="4"|There is only mosaic no video when preview or playback video file remotely.
 +
|-
 +
|Network fluency is not good.
 +
|-
 +
|Client-end resources are limit.
 +
|-
 +
|Current user has no right to monitor.
 +
|-
 +
!rowspan="4"|Network connection is not stable.
 +
|-
 +
|IP address conflict.
 +
|-
 +
|MAC address conflict.
 +
|-
 +
|PC or device network card is not good.
 +
|-
 +
!rowspan="5"|Keyboard can not control NVR.
 +
|-
 +
|NVR serial port setup is not correct
 +
|-
 +
|Address is not correct
 +
|-
 +
|When there are several switchers, power supply is not enough.
 +
|-
 +
|Transmission distance is too far.
 +
|-
 +
!rowspan="5"|Alarm signal can not been disarmed.
 +
|-
 +
|Alarm setup is not correct.
 +
|-
 +
|Alarm output has been open manually.
 +
|-
 +
|Input device error or connection is not correct.
 +
|-
 +
|Some program versions may have this problem. Please upgrade your system.
 +
|-
 +
!rowspan="5"|Alarm function is null.
 +
|-
 +
|Alarm setup is not correct.
 +
|-
 +
|Alarm cable connection is not correct.
 +
|-
 +
|Alarm input signal is not correct.
 +
|-
 +
|There are two loops connect to one alarm device.
 +
|-
 +
!rowspan="4"|Record storage period is not enough.
 +
|-
 +
|Camera quality is too low. Lens is dirty. Camera is installed against the light. Camera aperture setup is not correct.
 +
|-
 +
|HDD capacity is not enough.
 +
|-
 +
|HDD is damaged.
 +
|-
 +
!rowspan="5"|Can not playback the downloaded file.
 +
|-
 +
|There is no media player.
 +
|-
 +
|No DXB8.1 or higher graphic acceleration software.
 +
|-
 +
|There is no DivX503Bundle.exe control when you play the file transformed to AVI via media player.
 +
|-
 +
|No DivX503Bundle.exe or ffdshow-2004 1012 .exe in Windows XP OS.
 +
|-
 +
!rowspan="2"|Forgot local menu operation password or network password
 +
|-
 +
|Please contact your local service engineer or our sales person for help. We can guide you to solve this problem.
 +
|-
 +
!rowspan="5"|There is no video. The screen is in black.
 +
|-
 +
|IPC IP address is not right.
 +
|-
 +
|IPC port number is not right.
 +
|-
 +
|IPC account (user name/password) is not right.
 +
|-
 +
|IPC is offline.
 +
|-
 +
!rowspan="2"|The displayed video is not full in the monitor.
 +
|-
 +
|Please cheek current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080
 +
|-
 +
!rowspan="3"|There is no HDMI output.
 +
|-
 +
|Displayer is not in HDMI mode.
 +
|-
 +
|HDMI cable connection is not right.
 +
|-
 +
!rowspan="3"|The video is not fluent when I view in multiple-channel mode from the client-end.
 +
|-
 +
|The network bandwidth is not sufficient. The multiple-channel monitor operation needs at least 100M or higher.
 +
|-
 +
|Your PC resources are not sufficient. For 16-ch remote monitor operation, the PC shall have the following environment: Quad Core, 2G or higher memory, independent displayer, display card memory 256M or higher.
 +
|-
 +
!rowspan="6"|I can not connect to the IPC
 +
|-
 +
|Please make sure the IPC has booted up.
 +
|-
 +
|IPC network connection is right and it is online
 +
|-
 +
|The device has connected to the too many IPC. It can not transmit the video.
 +
|-
 +
|Check the IPC port value and the time zone is the same as the NVR.
 +
|-
 +
|Make sure current network environment is stable.
 +
|-
 +
!rowspan="2"|After I set the NVR resolution as 1080P, my monitor can not display.
 +
|-
 +
|Shut down the device and then reboot. When you reboot, please press the Fn button at the same time and then release after 5 seconds. You can restore NVR resolution to the default setup.
 +
|-
 +
!rowspan="2"|After I login the Web, I can not find the remote interface to add the IPC.
 +
|-
 +
|Please clear the Web controls and load again.
 +
|-
 +
!rowspan="3"|I use the VGA montior. If I use the multple-window mode, I see the video from the main stream or the sub stream. 
 +
|-
 +
|For 32-channel series product, the 9/16-window is using the sub stream.
 +
|-
 +
|For 4/8/16 series product, system is using the main stream no matter you are in what display mode.
 +
|}
  
−
 
+
[[Category:Troubleshoot]]
−
 
+
[[Category:NVR Troubleshoot]]
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
NVR FAQ
 
−
 
 
−
Questions Solutions
 
−
NVR can not boot up properly.
 
−
* Input power is not correct.
 
−
* Power connection is not correct.
 
−
* Power switch button is damaged.
 
−
* Program upgrade is wrong.
 
−
* HDD malfunction or something wrong with HDD ribbon.
 
−
* Seagate DB35.1, DB35.2，SV35 or Maxtor 17-g has compatibility problem. Please upgrade to the latest version to solve this problem.
 
−
* Front panel error.
 
−
* Main board is damaged.
 
−
NVR often automatically shuts down or stops running.
 
−
* Input voltage is not stable or it is too low.
 
−
* HDD malfunction or something wrong wit the ribbon.
 
−
* Button power is not enough.
 
−
* Front video signal is not stable.
 
−
* Working environment is too harsh, too much dust.
 
−
* Hardware malfunction.
 
−
System can not detect hard disk.
 
−
* HDD is broken.
 
−
* HDD ribbon is damaged.
 
−
* HDD cable connection is loose.
 
−
* Main board SATA port is broken.
 
−
There is no video output whether it is one-channel, multiple-channel or all-channel output. * Program is not compatible. Please upgrade to the latest version.
 
−
* Brightness is 0. Please restore factory default setup.
 
−
* Check your screen saver.
 
−
* NVR hardware malfunctions.
 
−
I can not search local records.
 
−
* HDD ribbon is damaged.
 
−
* HDD is broken.
 
−
* Upgraded program is not compatible.
 
−
* The recorded file has been overwritten.
 
−
* Record function has been disabled.
 
−
Video is distorted when searching local records.
 
−
* Video quality setup is too low.
 
−
* Program read error, bit data is too small. There is mosaic in the full screen. Please restart the NVR to solve this problem.
 
−
* HDD data ribbon error.
 
−
* HDD malfunction.
 
−
* NVR hardware malfunctions.
 
−
Time display is not correct. * Setup is not correct
 
−
* Battery contact is not correct or voltage is too low.
 
−
* Crystal is broken.
 
−
NVR can not control PTZ.
 
−
* Front panel PTZ error
 
−
* PTZ decoder setup, connection or installation is not correct.
 
−
* Cable connection is not correct.
 
−
* PTZ setup is not correct.
 
−
* PTZ decoder and NVR protocol is not compatible.
 
−
* PTZ decoder and NVR address is not compatible.
 
−
* When there are several decoders, please add 120 Ohm between the PTZ decoder A/B cables furthest end to delete the reverberation or impedance matching. Otherwise the PTZ control is not stable.
 
−
* The distance is too far.
 
−
I can not log in client-end or web.
 
−
* For Windows 98 or Windows ME user, please update your system to Windows 2000 sp4. Or you can install client-end software of lower version. Please note right now, our NVR is not compatible with Windows VISTA control.
 
−
* ActiveX control has been disabled.
 
−
* No dx8.1 or higher. Please upgrade display card driver.
 
−
* Network connection error.
 
−
* Network setup error.
 
−
* Password or user name is invalid.
 
−
* Client-end is not compatible with NVR program.
 
−
There is only mosaic no video when preview or playback video file remotely. * Network fluency is not good.
 
−
* Client-end resources are limit.
 
−
* Current user has no right to monitor.
 
−
Network connection is not stable. * Network is not stable.
 
−
* IP address conflict.
 
−
* MAC address conflict.
 
−
* PC or device network card is not good.
 
−
Burn error /USB back error.
 
−
* Burner and NVR are in the same data cable.
 
−
* System uses too much CPU resources. Please stop record first and then begin backup.
 
−
* Data amount exceeds backup device capacity. It may result in burner error.
 
−
* Backup device is not compatible.
 
−
* Backup device is damaged.
 
−
Keyboard can not control NVR.
 
−
* NVR serial port setup is not correct
 
−
* Address is not correct
 
−
* When there are several switchers, power supply is not enough.
 
−
* Transmission distance is too far.
 
−
Alarm signal can not been disarmed.
 
−
* Alarm setup is not correct.
 
−
* Alarm output has been open manually.
 
−
* Input device error or connection is not correct.
 
−
* Some program versions may have this problem. Please upgrade your system.
 
−
Alarm function is null.
 
−
* Alarm setup is not correct.
 
−
* Alarm cable connection is not correct.
 
−
* Alarm input signal is not correct.
 
−
* There are two loops connect to one alarm device.
 
−
Record storage period is not enough. * Camera quality is too low. Lens is dirty. Camera is installed against the light. Camera aperture setup is not correct.
 
−
* HDD capacity is not enough.
 
−
* HDD is damaged.
 
−
Can not playback the downloaded file. * There is no media player.
 
−
* No DXB8.1 or higher graphic acceleration software.
 
−
* There is no DivX503Bundle.exe control when you play the file transformed to AVI via media player.
 
−
* No DivX503Bundle.exe or ffdshow-2004 1012 .exe in Windows XP OS.
 
−
Forgot local menu operation password or network password * Please contact your local service engineer or our sales person for help. We can guide you to solve this problem.
 
−
There is no video. The screen is in black.
 
−
* IPC IP address is not right.
 
−
* IPC port number is not right.
 
−
* IPC account (user name/password) is not right.
 
−
* IPC is offline.
 
−
The displayed video is not full in the monitor. Please cheek current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080.
 
−
 
 
−
There is no HDMI output. * Displayer is not in HDMI mode.
 
−
* HDMI cable connection is not right.
 
−
The video is not fluent when I view in multiple-channel mode from the client-end. * The network bandwidth is not sufficient. The multiple-channel monitor operation needs at least 100M or higher.
 
−
* Your PC resources are not sufficient. For 16-ch remote monitor operation, the PC shall have the following environment: Quad  Core, 2G or higher memory, independent displayer, display card memory 256M or higher.
 
−
I can not connect to the IPC * Please make sure the IPC has booted up.
 
−
* IPC network connection is right and it is online
 
−
* IPC IP is in the blacklist.
 
−
* The device has connected to the too many IPC. It can not transmit the video.
 
−
* Check the IPC port value and the time zone is the same as the NVR.
 
−
* Make sure current network environment is stable.
 
−
After I set the NVR resolution as 1080P, my monitor can not display. Shut down the device and then reboot. When you reboot, please press the Fn button at the same time and then release after 5 seconds. You can restore NVR resolution to the default setup. 
 
−
My admin account has been changed and I can not log in. Use telnet and then input the following command：
 
−
cd /mnt/mtd/Config/
 
−
rm -rf group
 
−
rm -rf password
 
−
Reboot the device to restore the default password.
 
−
After I login the Web , I can not find the remote interface to add the IPC. Please clear the Web controls and load again.
 
−
I use the VGA montior. If I use the multple-window mode, I see the video from the main stream or the sub stream. * For 32-channel series product, the 9/16-window is using the sub stream.
 
−
* For 4/8/16 series product, system is using the main stream no matter you are in what display mode.
 

Latest revision as of 20:39, 7 December 2022

Network


Playback and Recording

PTZ

Audio

Video Loss and Image Issues

Functionality

Quick Reference

NVR FAQ
Problem Solution
NVR will not boot. Input power is not correct.
Power connection is not correct.
Power switch button is damaged.
Program upgrade is wrong.
HDD malfunction or something wrong with HDD ribbon.
Seagate DB35.1, DB35.2，SV35 or Maxtor 17-g has compatibility problem. Please upgrade to the latest version to solve this problem.
Front panel error.
Main board is damaged.
NVR often automatically shuts down or stops running. Input voltage is not stable or it is too low.
HDD malfunction or something wrong wit the ribbon.
Button power is not enough.
Front video signal is not stable.
Working environment is too harsh, too much dust.
Hardware malfunction.
System is unable to detect hard drive. HDD is broken.
HDD ribbon is damaged.
HDD cable connection is loose.
Main board SATA port is broken.
Video loss from 1, multiple, or all channels.
Program is not compatible. Please upgrade to the latest version.
Brightness is 0. Please restore factory default setup.
Check your screen saver.
NVR hardware malfunctions.
I can not search local records.
HDD ribbon is damaged.
HDD is broken.
Upgraded program is not compatible.
The recorded file has been overwritten.
Record function has been disabled
Video is distorted when searching local records.
Video quality setup is too low.
Program read error, bit data is too small. There is mosaic in the full screen. Please restart the NVR to solve this problem.
HDD data ribbon error.
HDD malfunction.
NVR hardware malfunctions.
Time display is not correct.
Setup is not correct
Battery contact is not correct or voltage is too low.
Crystal is broken.
NVR can not control PTZ
Front panel PTZ error
PTZ decoder setup, connection or installation is not correct.
Cable connection is not correct.
PTZ setup is not correct.
PTZ decoder and NVR protocol is not compatible.
PTZ decoder and NVR address is not compatible.
When there are several decoders, please add 120 Ohm between the PTZ decoder A/B cables furthest end to delete the reverberation or impedance matching. Otherwise the PTZ control is not stable.
The distance is too far.
Unable to login to WebGUI
For Windows 98 or Windows ME user, please update your system to Windows 2000 sp4. Or you can install client-end software of lower version. Please note right now, our NVR is not compatible with Windows VISTA control.
ActiveX control has been disabled.
No dx8.1 or higher. Please upgrade display card driver.
Network connection error.
Network setup error.
Password or user name is invalid.
Client-end is not compatible with NVR program.
There is only mosaic no video when preview or playback video file remotely.
Network fluency is not good.
Client-end resources are limit.
Current user has no right to monitor.
Network connection is not stable.
IP address conflict.
MAC address conflict.
PC or device network card is not good.
Keyboard can not control NVR.
NVR serial port setup is not correct
Address is not correct
When there are several switchers, power supply is not enough.
Transmission distance is too far.
Alarm signal can not been disarmed.
Alarm setup is not correct.
Alarm output has been open manually.
Input device error or connection is not correct.
Some program versions may have this problem. Please upgrade your system.
Alarm function is null.
Alarm setup is not correct.
Alarm cable connection is not correct.
Alarm input signal is not correct.
There are two loops connect to one alarm device.
Record storage period is not enough.
Camera quality is too low. Lens is dirty. Camera is installed against the light. Camera aperture setup is not correct.
HDD capacity is not enough.
HDD is damaged.
Can not playback the downloaded file.
There is no media player.
No DXB8.1 or higher graphic acceleration software.
There is no DivX503Bundle.exe control when you play the file transformed to AVI via media player.
No DivX503Bundle.exe or ffdshow-2004 1012 .exe in Windows XP OS.
Forgot local menu operation password or network password
Please contact your local service engineer or our sales person for help. We can guide you to solve this problem.
There is no video. The screen is in black.
IPC IP address is not right.
IPC port number is not right.
IPC account (user name/password) is not right.
IPC is offline.
The displayed video is not full in the monitor.
Please cheek current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080
There is no HDMI output.
Displayer is not in HDMI mode.
HDMI cable connection is not right.
The video is not fluent when I view in multiple-channel mode from the client-end.
The network bandwidth is not sufficient. The multiple-channel monitor operation needs at least 100M or higher.
Your PC resources are not sufficient. For 16-ch remote monitor operation, the PC shall have the following environment: Quad Core, 2G or higher memory, independent displayer, display card memory 256M or higher.
I can not connect to the IPC
Please make sure the IPC has booted up.
IPC network connection is right and it is online
The device has connected to the too many IPC. It can not transmit the video.
Check the IPC port value and the time zone is the same as the NVR.
Make sure current network environment is stable.
After I set the NVR resolution as 1080P, my monitor can not display.
Shut down the device and then reboot. When you reboot, please press the Fn button at the same time and then release after 5 seconds. You can restore NVR resolution to the default setup.
After I login the Web, I can not find the remote interface to add the IPC.
Please clear the Web controls and load again.
I use the VGA montior. If I use the multple-window mode, I see the video from the main stream or the sub stream.
For 32-channel series product, the 9/16-window is using the sub stream.
For 4/8/16 series product, system is using the main stream no matter you are in what display mode.
Retrieved from "https://DahuaWiki.com/index.php?title=Troubleshoot/NVR/&oldid=79323"