Difference between revisions of "Thermal/DHI-ASI7213X-T1/Instructions"
(→General Instructions) |
(→General Instructions) |
||
| Line 11: | Line 11: | ||
*[[Thermal/DHI-ASI7213X-T1/Instructions/Temperature_Only_Mode_Mask_Detection|Temperature Only Mode Mask Detection]] | *[[Thermal/DHI-ASI7213X-T1/Instructions/Temperature_Only_Mode_Mask_Detection|Temperature Only Mode Mask Detection]] | ||
*[[Thermal/DHI-ASI7213X-T1/Instructions/FR_Mode_+_Temperature_Monitoring|FR mode + Temperature Monitoring]] | *[[Thermal/DHI-ASI7213X-T1/Instructions/FR_Mode_+_Temperature_Monitoring|FR mode + Temperature Monitoring]] | ||
| − | |||
*[[Thermal/DHI-ASI7213X-T1/Instructions/Adjust_Motion_Detection|Adjust Motion Detection]] | *[[Thermal/DHI-ASI7213X-T1/Instructions/Adjust_Motion_Detection|Adjust Motion Detection]] | ||
*[[Thermal/DHI-ASI7213X-T1/Instructions/Adjust_Temp_Monitoring_Distance|Adjust Temp Monitoring Distance]] | *[[Thermal/DHI-ASI7213X-T1/Instructions/Adjust_Temp_Monitoring_Distance|Adjust Temp Monitoring Distance]] | ||
Revision as of 21:18, 8 June 2020
Contents
DHI-ASI7213X-T1 Instructions
Instructions
General Instructions
- Initial Setup Physical
- Initial Setup Software
- Disable Access Control, use only Thermal_Temperature Monitoring (Disable ""Not Authorized"" on every scan)"
- Enable Face Detection/Recognition
- Add Normal User
- Add Access Card to User Account
- Temperature Only Mode(no mask detection)
- Temperature Only Mode Mask Detection
- FR mode + Temperature Monitoring
- Adjust Motion Detection
- Adjust Temp Monitoring Distance
- Adjust Volume
- Mask Modes
- Import/Export Configuration File
- Disable Auto Reboot
- Check System Log
- Check Admin Log
- Change to Fahrenheit from Celsius
- WebUI: Adjust Motion Sensitivity
DSS Instructions
- Add DHI-ASI7213X-T1 to DSS-Express
- Use Body Temp Monitoring with DHI-ASI7213X-T1 and DSS-Express
- DHI-ASI7213X-T1 Temp Report
Firmware Update
Software and Firmware
Build Date: 07-15-2022
|
Build Date: 05-12-2020
| ||
| DSS Express | DHI-NVR5216-16P-I Firmware | Firmware | MCU Firmware |
|---|
Images
Data Capacity
Physical_Setup
Features and Facts
- 100Mbps Nic = 192.168.2.108
- 1000Mbps Nic = 192.168.1.108
- Wifi = Default DHCP
